The 611 only is analog and the 611D are digital . Do you have the complete code for that servo drive ? I do believe that with the Siemens product code you should be able to find the PDF documentation on the net . I used this servo system in the past years and it's quite similar to other servo system with reference +/-10Vdc analog input voltage . Wich kind of motors are connected ? 1FK6.... or 1FK7..... (this usually installed on machine tools .
Regards Alex On Thu, Oct 16, 2014 at 5:07 PM, andy pugh <[email protected]> wrote: > On 16 October 2014 16:01, David Armstrong <[email protected]> wrote: > > > Anyone have information on the above servo systems from siemens and > > integrating to Linuxcnc > > JT has them on his Bridgeport. > But I don't _think_ that machine runs LinuxCNC. > > -- > atp > If you can't fix it, you don't own it. > http://www.ifixit.com/Manifesto > > > ------------------------------------------------------------------------------ > Comprehensive Server Monitoring with Site24x7. > Monitor 10 servers for $9/Month. > Get alerted through email, SMS, voice calls or mobile push notifications. > Take corrective actions from your mobile device. > http://p.sf.net/sfu/Zoho > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Comprehensive Server Monitoring with Site24x7. Monitor 10 servers for $9/Month. Get alerted through email, SMS, voice calls or mobile push notifications. Take corrective actions from your mobile device. http://p.sf.net/sfu/Zoho _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
