There were several different versions of the 611 drives. Most of them were velocity mode drives with analog inputs.
I have some old ones (1992 vintage) on a lathe that runs LinuxCNC. They could be purchased with encoder or resolver feedback and a host of other options. Do you know how old they are? Do you have a manual for them? The 611 drives I have sit in a common rack and use a common DC bus power supply. The later drives were available as standalone units. Dave On 10/16/2014 11:07 AM, andy pugh wrote: > On 16 October 2014 16:01, David Armstrong <[email protected]> wrote: > >> Anyone have information on the above servo systems from siemens and >> integrating to Linuxcnc > JT has them on his Bridgeport. > But I don't _think_ that machine runs LinuxCNC. > --- This email is free from viruses and malware because avast! Antivirus protection is active. http://www.avast.com ------------------------------------------------------------------------------ Comprehensive Server Monitoring with Site24x7. Monitor 10 servers for $9/Month. Get alerted through email, SMS, voice calls or mobile push notifications. Take corrective actions from your mobile device. http://p.sf.net/sfu/Zoho _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
