I never did find really good info on the 611 drives. I have one on my BP 308 and if your using a RPC it better be a big one. The other thing I can recall from memory is both my Siemens drives use the same terminal number for the analog signal 56 or 58 I can't recall for sure. I think Robh sent me some manuals on them at one time. I'll see if I can find them.
JT On 10/16/2014 10:01 AM, David Armstrong wrote: > Guys, > Anyone have information on the above servo systems from siemens and > integrating to Linuxcnc > and reference material etc , at the moment i'm not sure these are analog or > digital > > > > thanks Guys > Dave > ------------------------------------------------------------------------------ > Comprehensive Server Monitoring with Site24x7. > Monitor 10 servers for $9/Month. > Get alerted through email, SMS, voice calls or mobile push notifications. > Take corrective actions from your mobile device. > http://p.sf.net/sfu/Zoho > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Comprehensive Server Monitoring with Site24x7. Monitor 10 servers for $9/Month. Get alerted through email, SMS, voice calls or mobile push notifications. Take corrective actions from your mobile device. http://p.sf.net/sfu/Zoho _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
