2014-11-20 7:22 GMT-03:00 robert - Innovative-RC <rob...@innovative-rc.com>:
> HI there > > going from memory here but you need two volages to the drvie so need a > power supply thats all, as control does that right now from its power > supply > > then feed the tachos back into the drive, on the M0 they went into the > control card, then back out that was all, so was a case of moving the > wires. > > then anlogo in yes +10 to -10v > here is forum link > > http://www.linuxcnc.org/linuxcnc/index.php/russian/forum/30-cnc-machines/559-emc-gets-fitted-to-a-leadwell-cnc-vmc > > sorry should of said the title etc > > you can always find me on IRC under the name, rob_h > 31A im sure i have a manual ill look at work today migth be lucky and > have it in PDF also, some used to be on Mitsubishi website > > rob > Thank you Rob for the link and for your help! I'm going to check out now the forum to know a little more about how you did it. So the drivers work with +/- 10 volts, that's great because I couldn't find anything about that yet, but anyway I could measure the input of the drivers since the machine is working. -- *Leonardo Marsaglia*. ------------------------------------------------------------------------------ Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server from Actuate! Instantly Supercharge Your Business Reports and Dashboards with Interactivity, Sharing, Native Excel Exports, App Integration & more Get technology previously reserved for billion-dollar corporations, FREE http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
