No. I did new tune up for 2.6.4. i did not use 2.5.4 config, because when i moved from 2.2.5 to 2.5.4 tune up figures (PID) was absolutely different. so for 2.6.4 i did fresh tune up.
But problem that i described - really strange. When machine power up F2 ON-- shaft of motor moves but no encoder data change on display (axis) looks like -- encoder disconnected--- and after turn power OFF -- click on F2 -- and turn shaft of the motor by hand -- and change position of shaft of the motor reflected by change figures on monitor. that is strange but that what i have . On Wed, Nov 26, 2014 at 4:52 PM, Peter C. Wallace <[email protected]> wrote: > On Wed, 26 Nov 2014, a k wrote: > > > Date: Wed, 26 Nov 2014 16:16:10 -0800 > > From: a k <[email protected]> > > Reply-To: "Enhanced Machine Controller (EMC)" > > <[email protected]> > > To: "Enhanced Machine Controller (EMC)" <[email protected] > > > > Subject: [Emc-users] encoder--? > > > > hi > > i just found strange thing with motor encoder. > > i am doing tuneup. > > axis x and z has same motor - nema 34 from servo dynamic and y axis has > SEM > > .motor. > > they all work ok with 2.5.4. > > with 2.6.4 i can see that on axis Y (SEM motor) , when click F1 (took off > > e-stop) than F2- power on - SEM motor start slowly rotate -- maybe noise > - > > maybe not--- interestingly encoder number did not show any changes -- > > rotation of the shaft of the SEM motor. > > maybe encoder problem? No encoder is good!! > > When i click F2 - power OFF -- and start rotate axis by the hand -- > encoder > > data start change ( on axis display). > > Are you using identical hal and ini files on 2.6.4 and 2.5.4? > if not, you should not really expect anything to work. > > If you have a working hal and ini file set on 2.5.4 you first must move > these > files from the configuration directory on your 2.5.4 system to the > configuration directory on your 2.6.4 system > > > Peter Wallace > Mesa Electronics > > > ------------------------------------------------------------------------------ > Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server > from Actuate! Instantly Supercharge Your Business Reports and Dashboards > with Interactivity, Sharing, Native Excel Exports, App Integration & more > Get technology previously reserved for billion-dollar corporations, FREE > > http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.clktrk > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server from Actuate! Instantly Supercharge Your Business Reports and Dashboards with Interactivity, Sharing, Native Excel Exports, App Integration & more Get technology previously reserved for billion-dollar corporations, FREE http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
