On Wednesday 26 November 2014 20:22:13 a k did opine And Gene did reply: > No. I did new tune up for 2.6.4. > i did not use 2.5.4 config, because when i moved from 2.2.5 to 2.5.4 > tune up figures (PID) was absolutely different. so for 2.6.4 i did > fresh tune up.
>From 2.2.5 to 2.5.4 was one hell of a jump, representing around 4 or 5 years worth of refinements in how it works, including some changes in the hal syntax to something that actually made sense. But from 2.5.4 to 2.6.4, any changes in the .ini or .hal file in the 2.6.4/config directory are very very small. But you have to do it "Your way" instead of at least trying what these knowledgeable people are telling you to do. Its as if anything they ask you to do becomes the last thing that will not get done because you've run out of patience for the day, and by tomorrow you will have totally forgotten it. Are we/they talking to a fencepost with dead batteries in its hearing aids? The results we are getting from telling you to do something are very discouraging WHEN YOU WON'T DO IT! These kind people really DO know what they are talking about, and if you will just do as they say, you will have a working machine many times quicker than you will if you just go charging in and change something that in several cases here as I've watched this, that you WILL have to go back and fix later because you broke it worse. > > But problem that i described - really strange. When machine power up F2 > ON-- shaft of motor moves but no encoder data change on display (axis) > looks like -- encoder disconnected--- > and after turn power OFF -- click on F2 -- and turn shaft of the motor > by hand -- and change position of shaft of the motor reflected by > change figures on monitor. > that is strange but that what i have . > > On Wed, Nov 26, 2014 at 4:52 PM, Peter C. Wallace <[email protected]> wrote: > > On Wed, 26 Nov 2014, a k wrote: > > > Date: Wed, 26 Nov 2014 16:16:10 -0800 > > > From: a k <[email protected]> > > > Reply-To: "Enhanced Machine Controller (EMC)" > > > > > > <[email protected]> > > > > > > To: "Enhanced Machine Controller (EMC)" > > > <[email protected] > > > > > > Subject: [Emc-users] encoder--? > > > > > > hi > > > i just found strange thing with motor encoder. > > > i am doing tuneup. > > > axis x and z has same motor - nema 34 from servo dynamic and y axis > > > has > > > > SEM > > > > > .motor. > > > they all work ok with 2.5.4. > > > with 2.6.4 i can see that on axis Y (SEM motor) , when click F1 > > > (took off e-stop) than F2- power on - SEM motor start slowly > > > rotate -- maybe noise > > > > - > > > > > maybe not--- interestingly encoder number did not show any changes > > > -- rotation of the shaft of the SEM motor. > > > maybe encoder problem? No encoder is good!! > > > When i click F2 - power OFF -- and start rotate axis by the hand -- > > > > encoder > > > > > data start change ( on axis display). > > > > Are you using identical hal and ini files on 2.6.4 and 2.5.4? > > if not, you should not really expect anything to work. > > > > If you have a working hal and ini file set on 2.5.4 you first must > > move these > > files from the configuration directory on your 2.5.4 system to the > > configuration directory on your 2.6.4 system I wouldn't move them, but I sure would copy them to the new 2.6.4/config directory. And I think that is precisely what Peter meant. > > > > Peter Wallace > > Mesa Electronics > > > > > > --------------------------------------------------------------------- > > --------- Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT > > Server from Actuate! Instantly Supercharge Your Business Reports and > > Dashboards with Interactivity, Sharing, Native Excel Exports, App > > Integration & more Get technology previously reserved for > > billion-dollar corporations, FREE > > > > http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg > > .clktrk _______________________________________________ > > Emc-users mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/emc-users > > ----------------------------------------------------------------------- > ------- Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT > Server from Actuate! Instantly Supercharge Your Business Reports and > Dashboards with Interactivity, Sharing, Native Excel Exports, App > Integration & more Get technology previously reserved for > billion-dollar corporations, FREE > http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg. > clktrk _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> US V Castleman, SCOTUS, Mar 2014 is grounds for Impeaching SCOTUS ------------------------------------------------------------------------------ Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server from Actuate! Instantly Supercharge Your Business Reports and Dashboards with Interactivity, Sharing, Native Excel Exports, App Integration & more Get technology previously reserved for billion-dollar corporations, FREE http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
