Hi Philipp > Now the question: Does anyone here have an idea how or where to get > some > spares of those adapters?
Do you have other probes available as well? It's much easier to find these adapters for 2.5 mm probes. http://www.digikey.com/product-detail/en/PK106-4/PK106-4-ND/3587113 http://www.keysight.com/en/pd-2422998-pn-N4864A/25-mm-probe-tip-to-pcb-adaptor-vertical?cc=AT&lc=ger Using your probes, don't you think you'd bee good just using any suitable receptacle for the tip and the ground spring contact on the probe to connect to a ground plane? You could extract a single pin from precision DIL socket for the probe tip. If you need 'full' pcb adapter for the 3.5mm probes and since this is the LinxCNC mailing list, you could get a few carrier DIL socket for the center pin and mill the outer sleeve from a piece of brass. https://www.buerklin.com/de/katalog/Carrier-IC-Fassungen-Typ-MPE-GARRY-MC-Metal-Carrier-DIL-B091000.html (I'm not 100% sure if a standard probe tip fits in..) See you Flo ------------------------------------------------------------------------------ Dive into the World of Parallel Programming The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
