If the machine is covered with water soluble coolant residue then soap and water will clean it easier than petroleum products. I usually try hot/warm soap and water first. Purple Power is amazing also.
On Sat, Mar 28, 2015 at 9:22 PM, Dave Cole <linuxcncro...@gmail.com> wrote: > Scrape off all you can of the heavy stuff. > > http://www.ehow.com/way_5434198_homemade-engine-degreaser.html > > The kerosene mix works very well on heavy grease. Spray it on, let it > sit, brush and wipe it off, repeat. Dawn dishwashing soap works well > with kerosense. Buy big bottles of it from Sam's/Costco etc. It works > best when things are warm of course. Aim a space heater at the > machine for a while and get it up to 80-90 degrees then spray it on and > things will go much faster. > I've used that solution for years to clean up dirty engines. A cheap > pump up tank sprayer such as used for weeds etc works fine. > > Dave > > On 3/28/2015 7:42 PM, richsh...@comcast.net wrote: > > I just bought a 1975 vintage Anayak FV2 mill, imported to the US by > DoAll. It has so much grease, muck, and yuck on it, I need to clean it. So > far I've tried citrus based solvent, paint thinner, automotive, parts > cleaner...... Applying it via green and brown scotch brite pads. Any > suggestions on a degrease process? > > > > ----- Original Message ----- > > > > From: emc-users-requ...@lists.sourceforge.net > > To: emc-users@lists.sourceforge.net > > Sent: Saturday, March 28, 2015 2:44:22 PM > > Subject: Emc-users Digest, Vol 107, Issue 78 > > > > Send Emc-users mailing list submissions to > > emc-users@lists.sourceforge.net > > > > To subscribe or unsubscribe via the World Wide Web, visit > > https://lists.sourceforge.net/lists/listinfo/emc-users > > or, via email, send a message with subject or body 'help' to > > emc-users-requ...@lists.sourceforge.net > > > > You can reach the person managing the list at > > emc-users-ow...@lists.sourceforge.net > > > > When replying, please edit your Subject line so it is more specific > > than "Re: Contents of Emc-users digest..." > > > > > > Today's Topics: > > > > 1. Re: Possible New Lathe (richsh...@comcast.net) > > 2. ot: voltage and steppers (kqt4a...@gmail.com) > > 3. Re: ot: voltage and steppers (Dave Cole) > > 4. Re: ot: voltage and steppers (kqt4a...@gmail.com) > > 5. 2.6.4 to 2.6.7 update without a network connection? > > (Gregg Eshelman) > > > > > > ---------------------------------------------------------------------- > > > > Message: 1 > > Date: Sat, 28 Mar 2015 15:24:42 +0000 (UTC) > > From: richsh...@comcast.net > > Subject: Re: [Emc-users] Possible New Lathe > > To: emc-users@lists.sourceforge.net > > Message-ID: > > <1991675046.16595850.1427556282912.javamail.zim...@comcast.net> > > Content-Type: text/plain; charset=utf-8 > > > > Boris? Obviously, an oversize Van Norman vertical mill, I'd say 7,000 > lbs or so. > > > > ----- Original Message ----- > > > > From: emc-users-requ...@lists.sourceforge.net > > To: emc-users@lists.sourceforge.net > > Sent: Friday, March 27, 2015 11:45:16 PM > > Subject: Emc-users Digest, Vol 107, Issue 76 > > > > Send Emc-users mailing list submissions to > > emc-users@lists.sourceforge.net > > > > To subscribe or unsubscribe via the World Wide Web, visit > > https://lists.sourceforge.net/lists/listinfo/emc-users > > or, via email, send a message with subject or body 'help' to > > emc-users-requ...@lists.sourceforge.net > > > > You can reach the person managing the list at > > emc-users-ow...@lists.sourceforge.net > > > > When replying, please edit your Subject line so it is more specific > > than "Re: Contents of Emc-users digest..." > > > > > > Today's Topics: > > > > 1. Re: Converting straight lines to arcs? (andy pugh) > > 2. Re: Tsudakoma TRNC-201S on a bridgeport Interact Series II? > > Crazy? (Gregg Eshelman) > > 3. Re: Possible New Lathe (Gregg Eshelman) > > 4. Anyone have leftovers from a 9x20 CNC conversion? (Gregg Eshelman) > > 5. Re: Possible New Lathe (Gregg Eshelman) > > 6. Re: Velocity closed loop + Position losed loop on an axis > > (Jon Elson) > > 7. Re: Velocity closed loop + Position losed loop on an axis > > (Karlsson & Wang) > > > > > > ---------------------------------------------------------------------- > > > > Message: 1 > > Date: Sat, 28 Mar 2015 00:36:39 +0000 > > From: andy pugh <bodge...@gmail.com> > > Subject: Re: [Emc-users] Converting straight lines to arcs? > > To: "Enhanced Machine Controller (EMC)" > > <emc-users@lists.sourceforge.net> > > Message-ID: > > <CAN1+YZVdhS=mnazvq02zh_qyjpfjslncriremqhknmhhrdx...@mail.gmail.com> > > Content-Type: text/plain; charset=UTF-8 > > > > On 28 March 2015 at 00:13, Gregg Eshelman <g_ala...@yahoo.com> wrote: > >> Will it allow saving/exporting the modified G-code file? > > It looks like that is _all_ it allows. > > > > --- > This email has been checked for viruses by Avast antivirus software. > http://www.avast.com > > > > ------------------------------------------------------------------------------ > Dive into the World of Parallel Programming The Go Parallel Website, > sponsored > by Intel and developed in partnership with Slashdot Media, is your hub for > all > things parallel software development, from weekly thought leadership blogs > to > news, videos, case studies, tutorials and more. Take a look and join the > conversation now. http://goparallel.sourceforge.net/ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > -- Addressee is the intended audience. If you are not the addressee then my consent is not given for you to read this email furthermore it is my wish you would close this without saving or reading, and cease and desist from saving or opening my private correspondence. Thank you for honoring my wish. ------------------------------------------------------------------------------ Dive into the World of Parallel Programming The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
