On 06.05.15 12:01, Gene Heskett wrote:
> > So I have added it manually to /boot/grub/grub.cfg on the normal,
> > default=0 entry.
> 
> I did that only to the normal boot, not to the recovery entry.  And now 
> the drive refuses to e2fsck at either the default superblock or the 
> suggested -b 8193 option e2fsck suggests.

OK, assuming you're e2fsck-ing because the default boot now doesn't
work, have you tried booting the recovery entry, and undoing the
/boot/grub/grub.cfg hand-edit, to see if the drive then behaves?

> So, on a fairly new toshiba drive, what would be a good superblock 
> address?

NDI, but trying on my little Western Digital 320 GB drive, I get:

# dumpe2fs /dev/disk/by-uuid/18cb718f-4e16-4e63-a0cb-eb10a1dc3607 | grep -i 
superblock
dumpe2fs 1.42.5 (29-Jul-2012)
  Primary superblock at 1, Group descriptors at 2-3
  Backup superblock at 8193, Group descriptors at 8194-8195
  Backup superblock at 24577, Group descriptors at 24578-24579
  Backup superblock at 40961, Group descriptors at 40962-40963
  Backup superblock at 57345, Group descriptors at 57346-57347
  Backup superblock at 73729, Group descriptors at 73730-73731
  Backup superblock at 204801, Group descriptors at 204802-204803
  Backup superblock at 221185, Group descriptors at 221186-221187

That's nothing like the old days, when I used to see numbers like:
32768, 98304, 163840, 229376, 294912

You seem to have a fair crop of gremlins, Gene. Have they all been holed
up over winter, and now smelled spring?

Erik

------------------------------------------------------------------------------
One dashboard for servers and applications across Physical-Virtual-Cloud 
Widest out-of-the-box monitoring support with 50+ applications
Performance metrics, stats and reports that give you Actionable Insights
Deep dive visibility with transaction tracing using APM Insight.
http://ad.doubleclick.net/ddm/clk/290420510;117567292;y
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Reply via email to