Hello! I built some pretty large gluing press for a customer. Here are 2 pics of it during the build. Here is the whole rotating platform (5m long, 1,6m wide): http://picpaste.com/IMG_20150403_140923-6uIvoq8i.jpg Here is some material loaded in it: http://picpaste.com/IMG_20150324_185227-meOk5ilU.jpg
It can glue together wood plates of size up to 5000x1200x60 mm (max weight can reach 200+ kg, depending on particular wood used). The thing is that those plates need to be sanded from both sides to get smooth surface, but sanding machines process only one side (usually top surface) so customer needs a device that would swap them over between the operations. Can anyone share some pics or suggestions on what would best practice to do so? I believe that somebody somewhere already must have faced this kind of issue. I am not sure that my current ideas about cylindrical structure, which has an opening at one end to move the plate in and out is the best solution for this task. Any viable suggestions will be appreciated :) Viesturs ------------------------------------------------------------------------------ One dashboard for servers and applications across Physical-Virtual-Cloud Widest out-of-the-box monitoring support with 50+ applications Performance metrics, stats and reports that give you Actionable Insights Deep dive visibility with transaction tracing using APM Insight. http://ad.doubleclick.net/ddm/clk/290420510;117567292;y _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
