On Thu, May 7, 2015 at 5:52 PM, Viesturs Lācis <viesturs.la...@gmail.com>
wrote:
> 2015-05-08 0:38 GMT+03:00 andy pugh <bodge...@gmail.com>:
> > On 7 May 2015 at 22:31, Viesturs Lācis <viesturs.la...@gmail.com> wrote:
> >> but sanding machines process only one side (usually
> >> top surface) so customer needs a device that would swap them over
> >> between the operations.
> >
> > Does the sanding machine exist?
> > One option might be to drop the sanding drum underneath the wood on
> > the return pass.
> >
>
> It does not exist yet, but they need something big, approximately like
> this:
>
> https://www.google.lv/search?q=SANDHYA+900&rlz=1C1LENP_enLV616LV616&es_sm=93&source=lnms&tbm=isch&sa=X&ei=A95LVYajCaTkyAOjx4GwCQ&ved=0CAcQ_AUoAQ&biw=1407&bih=780#tbm=isch&q=SANDYA+900&nfpr=1&imgrc=xhDvGEpPzcCvhM%253A%3BpNwp_Hw5nndubM%3Bhttp%253A%252F%252Fpartners.scmgroup.com%252Fmedia%252Fuserfiles%252Ffile%252Fsuper%252520finitore%252520zoom.jpg%3Bhttp%253A%252F%252Fpartners.scmgroup.com%252Fgatech%252Fproducts.asp%253Fp%253D11965%3B770%3B1155
>
> This one in the picture is one of the potential machines with 3
> sanding belts (because they need to remove up to 1 mm from the
> thickness of the plate). So there is no option of dropping the drum
> below.
> Theoretically I could get a job of building the sanding machine (and
> place a sanding belts also for bottom side), but I feel that there are
> too much technical details about the whole process that I should know
> for successful result, so I lean towards skipping such an endeavor and
> build only the conveyor and the unit that turns the plates over.
>
> Viesturs
>
Damn! Wouldna mind havin' one a them in my shop![?]
------------------------------------------------------------------------------
One dashboard for servers and applications across Physical-Virtual-Cloud
Widest out-of-the-box monitoring support with 50+ applications
Performance metrics, stats and reports that give you Actionable Insights
Deep dive visibility with transaction tracing using APM Insight.
http://ad.doubleclick.net/ddm/clk/290420510;117567292;y
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
