I had a c axis with a 10,000 pulse coder red top fanuc motor. Call the people at http://www.fanucworld.com/ , Tennesee Industrial Electronics, they'll tell you what it is.
On Thu, May 21, 2015 at 1:01 PM, Dave Caroline <[email protected]> wrote: > If you have it wired, just rotate n turns and watch the variable get > updated in halmeter > > should come to some sensible number I wouldnt be surprised to see it > being n*(700 or 8000 clue in the part number)* 4 > > Dave Caroline > > On 21/05/2015, Rick Lair <[email protected]> wrote: > > I have a Fanuc spindle motor on the VMC I am retrofitting right now, > > and I intercepted the motor encoder cable, with an ENCY card from Mesa, > > the machine was open loop in regards to the spindle prior to this. > > > > Would anyone know what the PPR might be on one of these, I didn't know > > if they used a common PPR encoder on these motors, or of maybe a way to > > figure out what it is? The motor is from 1984, it is a model 8, PN: > > A06B-1008-B 700#8000. I can't find any data for it any where, and I am > > not sure what to put in INI section to try to get it going. > > > > > > -- > > > > Thanks > > > > > > Rick Lair > > Superior Roll & Turning LLC > > 399 East Center Street > > Petersburg MI, 49270 > > PH: 734-279-1831 > > FAX: 734-279-1166 > > www.superiorroll.com > > > > > > > ------------------------------------------------------------------------------ > > One dashboard for servers and applications across Physical-Virtual-Cloud > > Widest out-of-the-box monitoring support with 50+ applications > > Performance metrics, stats and reports that give you Actionable Insights > > Deep dive visibility with transaction tracing using APM Insight. > > http://ad.doubleclick.net/ddm/clk/290420510;117567292;y > > _______________________________________________ > > Emc-users mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > > ------------------------------------------------------------------------------ > One dashboard for servers and applications across Physical-Virtual-Cloud > Widest out-of-the-box monitoring support with 50+ applications > Performance metrics, stats and reports that give you Actionable Insights > Deep dive visibility with transaction tracing using APM Insight. > http://ad.doubleclick.net/ddm/clk/290420510;117567292;y > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ One dashboard for servers and applications across Physical-Virtual-Cloud Widest out-of-the-box monitoring support with 50+ applications Performance metrics, stats and reports that give you Actionable Insights Deep dive visibility with transaction tracing using APM Insight. http://ad.doubleclick.net/ddm/clk/290420510;117567292;y _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
