I already have the gearchange configured, I was just trying to get the feedback correct on the visual readout on the screen,
Do you think that under these circumstances, it eliminates the chance of rigid tapping on this machine? On 5/22/2015 7:17 AM, andy pugh wrote: > On 22 May 2015 at 12:09, Rick Lair <[email protected]> wrote: >> Another question regarding this, seems how the encoder is on the motor, >> and there is a 2 speed transmission on the spindle, High is 1:1 and low >> 1:6.325, what HAL component, other than SCALE, do I need to use to >> change the ratio for the low speed feedback to the readout display, and >> controller for that matter. > What do you want to use the encoder output for? > > If it is just spindle speed, then it will work. If you want to use it > for spindle alignment then it won't work as the index will be at a > different spindle position every time. > Look at the "gearchange" component for a simple way to configure a > 2-speed spindle. For more gears it gets more difficult. > -- Thanks Rick Lair Superior Roll & Turning LLC 399 East Center Street Petersburg MI, 49270 PH: 734-279-1831 FAX: 734-279-1166 www.superiorroll.com ------------------------------------------------------------------------------ One dashboard for servers and applications across Physical-Virtual-Cloud Widest out-of-the-box monitoring support with 50+ applications Performance metrics, stats and reports that give you Actionable Insights Deep dive visibility with transaction tracing using APM Insight. http://ad.doubleclick.net/ddm/clk/290420510;117567292;y _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
