Hello Seb,
I have been working on this all week, I have run this program numerous
times on my simulator test PC in my office without any issue, as soon as
I try to run it on the machine, it gives us this fault. This morning I
made a new config using the Axis GUI, and it gives us the same fault,
(we are running Gmoccapy on our turning centers, and wanted to make sure
it wasn't a GUI issue).
The only thing different between my test PC, and the machines are the
added m-codes for the gear change, and for the tail stock commands, and
we use the TXXYY tool change format on the lathes, so I modified the
g-code program to eliminate the m-codes for the gear change, and
tailstock, and change the tool changes to the MxTy format.
The M-codes, and tool change work fine through MDI, and with other
programs, so I don't think that is the issue. The supervisor has removed
different sections of the program, and it will run, he puts them back
in, and it won't run,
It doesn't matter which section he removes though ( no one section would
specifically give or not give the fault ), the only thing we have found
was program size made a difference, The main program is 367 lines long
6736 KB's, if it was kept under about 260 lines, or 5KB's
Attached is the program we are dealing with, the file ending in rev2 is
what I am using on my test PC.
Thanks
Rick
On 7/10/2015 6:04 PM, Sebastian Kuzminsky wrote:
On 7/10/15 3:43 PM, Jeff Johnson wrote:
I have a program with threading G33 that will run if I take the threading
out of it but throw an error of "Bug: Call Stack Under Run" if I leave the
threading in the program. We use a post processor for our programs and have
done threading in the past but this one is persistent. Any Ideas?
Can you reproduce the problem by running the problematic gcode in a
standard sim config?
--
Thanks
Rick Lair
Superior Roll & Turning LLC
399 East Center Street
Petersburg MI, 49270
PH: 734-279-1831
FAX: 734-279-1166
www.superiorroll.com
%
N10G18G90
N20 G00X10.0Z1.5T0101 (T1 #NUCOR SHEAR PIN 7 & 9 1ST SIDE 907-44281)
N30G97S150M03M42
N40G96S450M03D1000
N50G00X3.0374Z0.0303M08
N60G95
N70G01X-0.04F0.007
N80Z0.1005
N90G00X3.0374
N100Z0.00
N110G01X-0.04
N120Z0.0402
N130X-0.0294Z0.1005
N140G00X3.0374
N150X10.0Z1.5
N160M09
N170M01
N180 G00X10.0Z1.5T0202 (T02 C DRILL)
N190G95
N200G97S800M04
N210M04
N220G00X0.0Z1.0M08
N230Z0.1
N240G01Z-0.079F0.001
N250G00Z0.1
N260Z-0.0759
N270G01Z-0.1414
N280G00Z0.1
N290Z-0.1389
N300G01Z-0.1907
N310G00Z0.1
N320Z-0.1882
N330G01Z-0.2
N340G00Z0.1
N350X10.0Z1.5
N360M09
N370M05
N380M85
N390G04P2.0
N400M86
N410G04P2.5
N420M01
N430 G00X10.0Z1.5T0303 (T3 ROUGH OD)
N440G97S150M42M3
N450G96S450M03D1000
N460G00X2.601Z0.1001M08
N470G95
N480G01Z-7.695F0.010
N490X2.7275
N500X2.782
N510G00Z0.1001
N520X2.42
N530G01Z-6.4995
N540G03X2.4362Z-6.5056I-0.0176K-0.0317
N550G01X2.4988Z-6.5369
N560G03X2.52Z-6.5625I-0.0256K-0.0256
N570G01Z-7.695
N580X2.601
N590X2.782Z-7.6903
N600G00Z0.1001
N610X2.239
N620G01Z-6.495
N630X2.3849
N640G03X2.42Z-6.4995I0.0K-0.0362
N650G01X2.62Z-6.4943
N660G00Z0.1001
N670X2.058
N680G01Z-6.495
N690X2.239
N700X2.439Z-6.4898
N710G00Z0.1001
N720X1.877
N730G01Z-6.495
N740X2.058
N750X2.258Z-6.4898
N760G00Z0.1001
N770X1.696
N780G01Z-1.4234
N790G03X1.7062Z-1.4276I-0.0206K-0.0299
N800G01X1.7688Z-1.4589
N810G03X1.79Z-1.4846I-0.0256K-0.0256
N820G01Z-6.495
N830X1.877
N840X2.077Z-6.4898
N850G00Z0.1001
N860X1.515
N870G01Z-1.417
N880X1.6549
N890G03X1.696Z-1.4234I0.0K-0.0362
N900G01X1.896Z-1.4181
N910G00Z0.1001
N920X1.335
N930G01Z-0.0119
N940X1.4788Z-0.0534
N950G03X1.515Z-0.0848I-0.0181K-0.0314
N960G01X1.715Z-0.0796
N970G00Z0.1001
N980X1.2933
N990G01Z0.0001
N1000X1.335Z-0.0119
N1010G00X1.3743Z0.0001
N1020X2.782
N1030Z0.1001
N1040X10.0Z1.5
N1050M09
N1060M01
N1070 G00X10.0Z1.5T0303 (T3 FINISH OD)
N1080G97S150M42M3
N1090G96S450M03D875
N1100G00X1.2782Z0.0958M08
N1110G95
N1120G01Z-0.0042F0.0085
N1130X1.4637Z-0.0577
N1140G03X1.495Z-0.0848I-0.0156K-0.0271
N1150G01Z-1.422
N1160X1.6448
N1170G03X1.6891Z-1.4312I0.0K-0.0313
N1180G01X1.7517Z-1.4625
N1190G03X1.77Z-1.4846I-0.0221K-0.0221
N1200G01Z-6.5
N1210X2.3748
N1220G03X2.4191Z-6.5092I0.0K-0.0313
N1230G01X2.4817Z-6.5405
N1240G03X2.5Z-6.5626I-0.0221K-0.0221
N1250G01Z-7.7
N1260X2.7174
N1270G00X2.9174
N1280Z0.0958
N1290X10.0Z1.5
N1300M09
N1310M01
N1320 G00X10.0Z1.5T0404 (T4 THREAD RELIEF)
N1330G97S150M42M3
N1340G96S350M03D1000
N1350G00X1.9094Z-1.344M08
N1360G95
N1370G01X1.3438F0.0022
N1380G00X1.9094
N1390Z-1.375
N1400G01X1.3438
N1410G00X1.9094
N1420X10.0Z1.5
N1430M09
N1440M01
N1450 G00X10.0Z1.5T0505 (T5 SHEAR GROOVE)
N1460G97S150M42M3
N1470G96S350M03D650
N1480G00X1.9000Z-3.9265M08
N1490G95
N1500G01X1.8281Z-3.9265F0.005
N1510G01Z-3.9955
N1520X1.8581
N1530G00Z-3.9265
N1540G01X1.7981
N1550G01Z-3.9955
N1560X1.8281
N1570G00Z-3.9265
N1580G01X1.7793
N1590G02X1.7681Z-3.9274I0.0023K-0.0345
N1600G01Z-3.9947
N1610G02X1.7773Z-3.9955I0.0079K0.0337
N1620G01X1.7981
N1630G00Z-3.9274
N1640G01X1.7681
N1650G02X1.7381Z-3.9351I0.0079K-0.0337
N1660G01Z-3.987
N1670G02X1.7681Z-3.9947I0.0229K0.0259
N1680G00Z-3.9351
N1690G01X1.7381
N1700G02Z-3.987I0.0229K-0.0259
N1710G00X1.900
N1720Z-3.9265
N1730G01X1.8488Z-3.8778
N1740G01Z-3.8778
N1750G03X1.7722Z-3.9218I-0.0444K0.0
N1760G02Z-4.0002I0.0054K-0.0392
N1770G03X1.8488Z-4.0442I-0.0061K-0.044
N1780G00X2.0488
N1790X10.0Z1.5
N1800M09
N1810M01
N1820 G00X10.0Z1.5T0606 (T6 THREADING TOOL)
N1830G97S225M04
N1840G00X2.0Z0.3M08
N1850X1.4689Z0.248
N1860G95
N1870G33Z-1.352K0.1667
N1880G00X2.0
N1890Z0.3
N1900X1.4491Z0.2424
N1910G33Z-1.3576K0.1667
N1920G00X2.0
N1930Z0.3
N1940X1.4341Z0.2382
N1950G33Z-1.3618K0.1667
N1960G00X2.0
N1970Z0.3
N1980X1.4228Z0.235
N1990G33Z-1.365K0.1667
N2000G00X2.0
N2010Z0.3
N2020X1.4142Z0.2325
N2030G33Z-1.3675K0.1667
N2040G00X2.0
N2050Z0.3
N2060X1.4077Z0.2307
N2070G33Z-1.3693K0.1667
N2080G00X2.0
N2090Z0.3
N2100X1.4027Z0.2293
N2110G33Z-1.3707K0.1667
N2120G00X2.0
N2130Z0.3
N2140X1.399Z0.2282
N2150G33Z-1.3718K0.1667
N2160G00X2.0
N2170Z0.3
N2180X1.3956Z0.2273
N2190G33Z-1.3727K0.1667
N2200G00X2.0
N2210Z0.3
N2220X1.3922Z0.2263
N2230G33Z-1.3737K0.1667
N2240G00X2.0
N2250Z0.3
N2260X1.3888Z0.2253
N2270G33Z-1.3747K0.1667
N2280G00X2.0
N2290Z0.3
N2300X1.3854Z0.2244
N2310G33Z-1.3756K0.1667
N2320G00X2.0
N2330Z0.3
N2340X1.382Z0.2234
N2350G33Z-1.3766K0.1667
N2360G00X2.0
N2370Z0.3
N2380X1.3785Z0.2224
N2390G33Z-1.3776K0.1667
N2400G00X2.0
N2410Z0.3
N2420X1.3751Z0.2215
N2430G33Z-1.3785K0.1667
N2440G00X2.0
N2450Z0.3
N2460X1.3717Z0.2205
N2470G33Z-1.3795K0.1667
N2480G00X2.0
N2490Z0.3
N2500X1.3683Z0.2196
N2510G33Z-1.3804K0.1667
N2520G00X2.0
N2530Z0.3
N2540X1.3649Z0.2186
N2550G33Z-1.3814K0.1667
N2560G00X2.0
N2570Z0.3
N2580X1.3615Z0.2176
N2590G33Z-1.3824K0.1667
N2600G00X2.0
N2610Z0.3
N2620X1.3581Z0.2167
N2630G33Z-1.3833K0.1667
N2640G00X2.0
N2650Z0.3
N2660X1.3547Z0.2157
N2670G33Z-1.3843K0.1667
N2680G00X2.0
N2690Z0.3
N2700X1.3513Z0.2147
N2710G33Z-1.3853K0.1667
N2720G00X2.0
N2730Z0.3
N2740X1.3479Z0.2138
N2750G33Z-1.3862K0.1667
N2760G00X2.0
N2770Z0.3
N2780X1.3445Z0.2128
N2790G33Z-1.3872K0.1667
N2800G00X2.0
N2810Z0.3
N2820X1.3411Z0.2118
N2830G33Z-1.3882K0.1667
N2840G00X2.0
N2850Z0.3
N2860X1.3376Z0.2109
N2870G33Z-1.3891K0.1667
N2880G00X2.0
N2890Z0.3
N2900X1.3342Z0.2099
N2910G33Z-1.3901K0.1667
N2920G00X2.0
N2930Z0.3
N2940X1.3308Z0.2089
N2950G33Z-1.3911K0.1667
N2960G00X2.0
N2970Z0.3
N2980X1.3274Z0.208
N2990G33Z-1.392K0.1667
N3000G00X2.0
N3010Z0.3
N3020X1.324Z0.207
N3030G33Z-1.393K0.1667
N3040G00X2.0
N3050Z0.3
N3060X1.3206Z0.2061
N3070G33Z-1.3939K0.1667
N3080G00X2.0
N3090Z0.3
N3100X1.3172Z0.2051
N3110G33Z-1.3949K0.1667
N3120G00X2.0
N3130Z0.3
N3140X1.3138Z0.2041
N3150G33Z-1.3959K0.1667
N3160G00X2.0
N3170Z0.3
N3180X1.3104Z0.2032
N3190G33Z-1.3968K0.1667
N3200G00X2.0
N3210Z0.3
N3220X1.307Z0.2022
N3230G33Z-1.3978K0.1667
N3240G00X2.0
N3250Z0.3
N3260X1.3036Z0.2012
N3270G33Z-1.3988K0.1667
N3280G00X2.0
N3290Z0.3
N3300X1.3002Z0.2003
N3310G33Z-1.3997K0.1667
N3320G00X2.0
N3330Z0.3
N3340X1.2992Z0.2
N3350G33Z-1.4K0.1667
N3360G00X2.0
N3370Z0.3
N3380X1.2992Z0.2
N3390G33Z-1.4K0.1667
N3400G00X2.0
N3410Z0.3
N3420X1.2992Z0.2
N3430G33Z-1.4K0.1667
N3440G00X2.0
N3450Z0.3
N3460X10.0Z1.5
N3470M09
N3480M87
N3490G04P2.5
N3500M84
N3510G04P2.0
N3520M01
N3530 G00X10.0Z1.5T0707 (T7 .125 PARTING TOOL)
N3540G97S150M03M42
N3550G96S250M03D500
N3560M03
N3570G00X3.055Z-7.640M08
N3580G95
N3590G01Z-7.640F0.002
N3600X0.2
N3610G00X3.925
N3620X12.0Z10.0
N3630M09
N3640M05
N3650M30
%
%
N10G18G90G7
N20 G00X10.0Z1.5m6t1 (T1 #NUCOR SHEAR PIN 7 & 9 1ST SIDE 907-44281)
N30G97S150M03
N40G96S450M03D1000
N50G00X3.0374Z0.0303M08
N60G95
N70G01X-0.04F0.007
N80Z0.1005
N90G00X3.0374
N100Z0.00
N110G01X-0.04
N120Z0.0402
N130X-0.0294Z0.1005
N140G00X3.0374
N150X10.0Z1.5
N160M09
N170M01
N180 G00X10.0Z1.5m6t2 (T02 C DRILL)
N190G95
N200G97S800M04
N210M04
N220G00X0.0Z1.0M08
N230Z0.1
N240G01Z-0.079F0.001
N250G00Z0.1
N260Z-0.0759
N270G01Z-0.1414
N280G00Z0.1
N290Z-0.1389
N300G01Z-0.1907
N310G00Z0.1
N320Z-0.1882
N330G01Z-0.2
N340G00Z0.1
N350X10.0Z1.5
N360M09
N370M05
N420M01
N430 G00X10.0Z1.5m6t3 (T3 ROUGH OD)
N440G97S150M3
N450G96S450M03D1000
N460G00X2.601Z0.1001M08
N470G95
N480G01Z-7.695F0.010
N490X2.7275
N500X2.782
N510G00Z0.1001
N520X2.42
N530G01Z-6.4995
N540G03X2.4362Z-6.5056I-0.0176K-0.0317
N550G01X2.4988Z-6.5369
N560G03X2.52Z-6.5625I-0.0256K-0.0256
N570G01Z-7.695
N580X2.601
N590X2.782Z-7.6903
N600G00Z0.1001
N610X2.239
N620G01Z-6.495
N630X2.3849
N640G03X2.42Z-6.4995I0.0K-0.0362
N650G01X2.62Z-6.4943
N660G00Z0.1001
N670X2.058
N680G01Z-6.495
N690X2.239
N700X2.439Z-6.4898
N710G00Z0.1001
N720X1.877
N730G01Z-6.495
N740X2.058
N750X2.258Z-6.4898
N760G00Z0.1001
N770X1.696
N780G01Z-1.4234
N790G03X1.7062Z-1.4276I-0.0206K-0.0299
N800G01X1.7688Z-1.4589
N810G03X1.79Z-1.4846I-0.0256K-0.0256
N820G01Z-6.495
N830X1.877
N840X2.077Z-6.4898
N850G00Z0.1001
N860X1.515
N870G01Z-1.417
N880X1.6549
N890G03X1.696Z-1.4234I0.0K-0.0362
N900G01X1.896Z-1.4181
N910G00Z0.1001
N920X1.335
N930G01Z-0.0119
N940X1.4788Z-0.0534
N950G03X1.515Z-0.0848I-0.0181K-0.0314
N960G01X1.715Z-0.0796
N970G00Z0.1001
N980X1.2933
N990G01Z0.0001
N1000X1.335Z-0.0119
N1010G00X1.3743Z0.0001
N1020X2.782
N1030Z0.1001
N1040X10.0Z1.5
N1050M09
N1060M01
N1070 G00X10.0Z1.5m6t3 (T3 FINISH OD)
N1080G97S150M3
N1090G96S450M03D875
N1100G00X1.2782Z0.0958M08
N1110G95
N1120G01Z-0.0042F0.0085
N1130X1.4637Z-0.0577
N1140G03X1.495Z-0.0848I-0.0156K-0.0271
N1150G01Z-1.422
N1160X1.6448
N1170G03X1.6891Z-1.4312I0.0K-0.0313
N1180G01X1.7517Z-1.4625
N1190G03X1.77Z-1.4846I-0.0221K-0.0221
N1200G01Z-6.5
N1210X2.3748
N1220G03X2.4191Z-6.5092I0.0K-0.0313
N1230G01X2.4817Z-6.5405
N1240G03X2.5Z-6.5626I-0.0221K-0.0221
N1250G01Z-7.7
N1260X2.7174
N1270G00X2.9174
N1280Z0.0958
N1290X10.0Z1.5
N1300M09
N1310M01
N1320 G00X10.0Z1.5m6t4 (T4 THREAD RELIEF)
N1330G97S150M3
N1340G96S350M03D1000
N1350G00X1.9094Z-1.344M08
N1360G95
N1370G01X1.3438F0.0022
N1380G00X1.9094
N1390Z-1.375
N1400G01X1.3438
N1410G00X1.9094
N1420X10.0Z1.5
N1430M09
N1440M01
N1450 G00X10.0Z1.5m6t5 (T5 SHEAR GROOVE)
N1460G97S150M3
N1470G96S350M03D650
N1480G00X1.9000Z-3.9265M08
N1490G95
N1500G01X1.8281Z-3.9265F0.005
N1510G01Z-3.9955
N1520X1.8581
N1530G00Z-3.9265
N1540G01X1.7981
N1550G01Z-3.9955
N1560X1.8281
N1570G00Z-3.9265
N1580G01X1.7793
N1590G02X1.7681Z-3.9274I0.0023K-0.0345
N1600G01Z-3.9947
N1610G02X1.7773Z-3.9955I0.0079K0.0337
N1620G01X1.7981
N1630G00Z-3.9274
N1640G01X1.7681
N1650G02X1.7381Z-3.9351I0.0079K-0.0337
N1660G01Z-3.987
N1670G02X1.7681Z-3.9947I0.0229K0.0259
N1680G00Z-3.9351
N1690G01X1.7381
N1700G02Z-3.987I0.0229K-0.0259
N1710G00X1.900
N1720Z-3.9265
N1730G01X1.8488Z-3.8778
N1740G01Z-3.8778
N1750G03X1.7722Z-3.9218I-0.0444K0.0
N1760G02Z-4.0002I0.0054K-0.0392
N1770G03X1.8488Z-4.0442I-0.0061K-0.044
N1780G00X2.0488
N1790X10.0Z1.5
N1800M09
N1810M01
N1820 G00X10.0Z1.5m6t6 (T6 THREADING TOOL)
N1830G97S225M04
N1840G00X2.0Z0.3M08
N1850X1.4689Z0.248
N1860G95
N1870G33Z-1.352K0.1667
N1880G00X2.0
N1890Z0.3
N1900X1.4491Z0.2424
N1910G33Z-1.3576K0.1667
N1920G00X2.0
N1930Z0.3
N1940X1.4341Z0.2382
N1950G33Z-1.3618K0.1667
N1960G00X2.0
N1970Z0.3
N1980X1.4228Z0.235
N1990G33Z-1.365K0.1667
N2000G00X2.0
N2010Z0.3
N2020X1.4142Z0.2325
N2030G33Z-1.3675K0.1667
N2040G00X2.0
N2050Z0.3
N2060X1.4077Z0.2307
N2070G33Z-1.3693K0.1667
N2080G00X2.0
N2090Z0.3
N2100X1.4027Z0.2293
N2110G33Z-1.3707K0.1667
N2120G00X2.0
N2130Z0.3
N2140X1.399Z0.2282
N2150G33Z-1.3718K0.1667
N2160G00X2.0
N2170Z0.3
N2180X1.3956Z0.2273
N2190G33Z-1.3727K0.1667
N2200G00X2.0
N2210Z0.3
N2220X1.3922Z0.2263
N2230G33Z-1.3737K0.1667
N2240G00X2.0
N2250Z0.3
N2260X1.3888Z0.2253
N2270G33Z-1.3747K0.1667
N2280G00X2.0
N2290Z0.3
N2300X1.3854Z0.2244
N2310G33Z-1.3756K0.1667
N2320G00X2.0
N2330Z0.3
N2340X1.382Z0.2234
N2350G33Z-1.3766K0.1667
N2360G00X2.0
N2370Z0.3
N2380X1.3785Z0.2224
N2390G33Z-1.3776K0.1667
N2400G00X2.0
N2410Z0.3
N2420X1.3751Z0.2215
N2430G33Z-1.3785K0.1667
N2440G00X2.0
N2450Z0.3
N2460X1.3717Z0.2205
N2470G33Z-1.3795K0.1667
N2480G00X2.0
N2490Z0.3
N2500X1.3683Z0.2196
N2510G33Z-1.3804K0.1667
N2520G00X2.0
N2530Z0.3
N2540X1.3649Z0.2186
N2550G33Z-1.3814K0.1667
N2560G00X2.0
N2570Z0.3
N2580X1.3615Z0.2176
N2590G33Z-1.3824K0.1667
N2600G00X2.0
N2610Z0.3
N2620X1.3581Z0.2167
N2630G33Z-1.3833K0.1667
N2640G00X2.0
N2650Z0.3
N2660X1.3547Z0.2157
N2670G33Z-1.3843K0.1667
N2680G00X2.0
N2690Z0.3
N2700X1.3513Z0.2147
N2710G33Z-1.3853K0.1667
N2720G00X2.0
N2730Z0.3
N2740X1.3479Z0.2138
N2750G33Z-1.3862K0.1667
N2760G00X2.0
N2770Z0.3
N2780X1.3445Z0.2128
N2790G33Z-1.3872K0.1667
N2800G00X2.0
N2810Z0.3
N2820X1.3411Z0.2118
N2830G33Z-1.3882K0.1667
N2840G00X2.0
N2850Z0.3
N2860X1.3376Z0.2109
N2870G33Z-1.3891K0.1667
N2880G00X2.0
N2890Z0.3
N2900X1.3342Z0.2099
N2910G33Z-1.3901K0.1667
N2920G00X2.0
N2930Z0.3
N2940X1.3308Z0.2089
N2950G33Z-1.3911K0.1667
N2960G00X2.0
N2970Z0.3
N2980X1.3274Z0.208
N2990G33Z-1.392K0.1667
N3000G00X2.0
N3010Z0.3
N3020X1.324Z0.207
N3030G33Z-1.393K0.1667
N3040G00X2.0
N3050Z0.3
N3060X1.3206Z0.2061
N3070G33Z-1.3939K0.1667
N3080G00X2.0
N3090Z0.3
N3100X1.3172Z0.2051
N3110G33Z-1.3949K0.1667
N3120G00X2.0
N3130Z0.3
N3140X1.3138Z0.2041
N3150G33Z-1.3959K0.1667
N3160G00X2.0
N3170Z0.3
N3180X1.3104Z0.2032
N3190G33Z-1.3968K0.1667
N3200G00X2.0
N3210Z0.3
N3220X1.307Z0.2022
N3230G33Z-1.3978K0.1667
N3240G00X2.0
N3250Z0.3
N3260X1.3036Z0.2012
N3270G33Z-1.3988K0.1667
N3280G00X2.0
N3290Z0.3
N3300X1.3002Z0.2003
N3310G33Z-1.3997K0.1667
N3320G00X2.0
N3330Z0.3
N3340X1.2992Z0.2
N3350G33Z-1.4K0.1667
N3360G00X2.0
N3370Z0.3
N3380X1.2992Z0.2
N3390G33Z-1.4K0.1667
N3400G00X2.0
N3410Z0.3
N3420X1.2992Z0.2
N3430G33Z-1.4K0.1667
N3440G00X2.0
N3450Z0.3
N3460X10.0Z1.5
N3470M09
N3520M01
N3530 G00X10.0Z1.5m6t7 (T7 .125 PARTING TOOL)
N3540G97S150M03
N3550G96S250M03D500
N3560M03
N3570G00X3.055Z-7.640M08
N3580G95
N3590G01Z-7.640F0.002
N3600X0.2
N3610G00X3.925
N3620X12.0Z10.0
N3630M09
N3640M05
N3650M30
%
------------------------------------------------------------------------------
Don't Limit Your Business. Reach for the Cloud.
GigeNET's Cloud Solutions provide you with the tools and support that
you need to offload your IT needs and focus on growing your business.
Configured For All Businesses. Start Your Cloud Today.
https://www.gigenetcloud.com/
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
