Here are the codes, And you are correct, bytes not kilobytes,
On 7/15/2015 11:20 AM, Sebastian Kuzminsky wrote:
On 7/15/15 8:54 AM, Rick Lair wrote:Hello Seb, I have been working on this all week, I have run this program numerous times on my simulator test PC in my office without any issue, as soon as I try to run it on the machine, it gives us this fault. This morning I made a new config using the Axis GUI, and it gives us the same fault, (we are running Gmoccapy on our turning centers, and wanted to make sure it wasn't a GUI issue).Which version of LinuxCNC are you using?The only thing different between my test PC, and the machines are the added m-codes for the gear change, and for the tail stock commands, and we use the TXXYY tool change format on the lathes, so I modified the g-code program to eliminate the m-codes for the gear change, and tailstock, and change the tool changes to the MxTy format.I take it this means your real machine (where you see the problem) uses remapping? Please post your remapped g-codes.It doesn't matter which section he removes though ( no one section would specifically give or not give the fault ), the only thing we have found was program size made a difference, The main program is 367 lines long 6736 KB's, if it was kept under about 260 lines, or 5KB'sInteresting. (I think you meant 6736 bytes, not kilobytes.)
-- Thanks Rick Lair Superior Roll & Turning LLC 399 East Center Street Petersburg MI, 49270 PH: 734-279-1831 FAX: 734-279-1166 www.superiorroll.com
Remapped Codes.tar.gz
Description: application/gzip
------------------------------------------------------------------------------ Don't Limit Your Business. Reach for the Cloud. GigeNET's Cloud Solutions provide you with the tools and support that you need to offload your IT needs and focus on growing your business. Configured For All Businesses. Start Your Cloud Today. https://www.gigenetcloud.com/
_______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
