Hi, I'm planning a mill conversion to LCNC and I'd like it to be able to do rigid tapping.
I figure that this will require an encoder or equivalent) on the spindle. I won't be able to to easily attach a common encoder disc to the spindle, so I will probably have to create an encoder (which appears easier than doing a remote encoder driven via a belt etc). I've looked but not found a spec for the required encoder resolution. Does anyone have advice as to min spindle encoder resolution (ppr) required? Has anyone gotten by with 8 or 12 pulses (32 or 48 quadrature) ? Dave ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
