I can also report some success with Fusion 360. I have produced some GCODE for milling quite easily, creating the CAD model directly in Fusion 360.
I have also done some turning work, starting with the Siemens turning Post and modifying it for LCNC. So far I have found it easy to modify. The G33 work the same is LCNC. The tool change is also easy to change and the upfront settings as well. G71 becomes G21, G0 becomes G20, CR= becomes R. Will need more work to do the rest. I also found it very useful to install it on my Macbook as well. It allows me to work at two different locations on the same project using the Cloud storage and without any USB sticks. Rudy ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
