Hi All
I have been asked to upgrade a machine that has a very old control
system still running on DOS. It is fitted with Yaskawa SGDB-03VDY1
drives. I cannot seem to find reference to that extract number. There
are two 2.9Kw motors and one 0.45Kw. They all have incremental encoders.
From the documentation that I could find I could not see how to drive
these things. It looks like a communications protocol that they use.
I have to decide how to go about retrofitting this machine. Do I keep
the motors (they are still very good) and keep the drives (dont know how
to drive). Does Mesa have a solution to drive these?
Or do I dump the drives and use another set of drives? What will I use
or,
Do I dump the lot and start fresh. What will I use in the place of
Yaskawa?
Has anyone on the forum used these with reasonable success?
I would like to go 7i80 so that I can fit an industrial panel mount pc
with touch screen.
Any thought from the wise ones?
-----------------------------
Regards / Groete
Marius D. Liebenberg
+27 82 698 3251
+27 12 743 6064
------------------------------------------------------------------------------
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
