On 29 October 2015 at 15:28, Bruce Layne <linux...@thinkingdevices.com> wrote:
> I have all the parts to make the CNC controlled power drawbar for my
> mill, including a couple of large SMC air cylinders, a stack of
> Belleville washers to tension the drawbar when the air cylinders aren't
> pushing down on it, and a big pile of steel to build the beefy frame
> that mounts to the cast head of the milling machine... just as soon as I
> get a Round Tuit.

If you make your own cylinder it actually all gets a bit simpler.

http://www.cnczone.com/forums/vertical-mill-lathe-project-log/109301-cnc.html
(There is a link at the bottom to a video of it in action)

-- 
atp
If you can't fix it, you don't own it.
http://www.ifixit.com/Manifesto

------------------------------------------------------------------------------
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Reply via email to