On Thu, Oct 29, 2015, at 11:28 AM, Bruce Layne wrote: > tormach ER-20 adaptor... Those are very > nice, but run the cost per tool up about > $50/tool so I only have one adapter and > 3 collets > > > I suggest you search eBay for the TTS compatible collet holders from our > Chinese communist capitalist friends. I have a 50 position tool rack > full of those, and I'm cheap, so they must not be anywhere close to $50 > each. The quality is quite good. There is no groove for an ATC, but > that's not a big deal for me and it'd be an easy feature to add on a lathe. > > I found them for you. :-) $16 each in quantities of ten on the slow > boat. Maybe less if you search longer than the minute I spent. > > www.ebay.com/itm/161733955633
I bought ten of these. They arrived faster than expected, and the quality seems very good. One nuisance was that DHL wanted a signature, but I was able to leave a signed note on the door. I did quite a bit more than a minute of searching, this seems to be the best supplier. -- John Kasunich jmkasun...@fastmail.fm ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
