The bpel04 has a star washer and the stud is welded to the back plane. The cases are bolted tight to the main column. The DIN rail is fastened down with star washers and the locking screws are tight.
JT On 12/20/2015 11:42 AM, Dave Caroline wrote: > The din rail in the 05 pic is that real tight to the back panel (add > star washers to cut through paint), make sure the green/yellow blocks > have the middle screw tight. > > One mighty thin grounding wire in bpel04.jpg, also could add star > washer to cut through paint > > You could measure the ground resistance too if you can. > > Others are likely to mention you have two grounds rather than a star > ground. Make sure cases are tight to frame to guarantee continuity > > Dave Caroline > > ------------------------------------------------------------------------------ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
