On Wednesday 30 December 2015 11:17:45 andy pugh wrote: > On 30 December 2015 at 15:37, Gene Heskett <ghesk...@wdtv.com> wrote: > > IIRC, this spindle-at-speed thing is only effective when its called > > for by the g-code command that needs it, such as in a G76 or G33.1. > > No, if the pin is wired (it defaults to permanently true) then the > behaviour is as-documented. > Ah, thanks for the correction Andy.
> "motion.spindle-at-speed" Motion will pause until this pin is TRUE, > under the following conditions: before the first feed move after each > spindle start or speed change; before the start of every chain of > spindle-synchronized moves; and if in CSS mode, at every rapid->feed > transition. > > ie, any feed move after a spindle speed change will pause until the > spindle is at the new speed. Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
