Ground to chassis is 0.01 ohm. JT
On 1/1/2016 7:42 AM, Bertho Stultiens wrote: > There is one remaining measurement that you should do: Measure the DC > resistance between the chassis and the protective ground of the > wall-outlet. That should be close to zero. Then, assuming that the > wall-outlet's ground is properly connected, you have assured that you > actually have a protective ground connected to your equipment. ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
