Andy,
I saw a 60 taper machine in storage here in Wichita.
It was from an arsenal.
The machine was huge. I would think it could cut the threads with a thread
mill or single point tooling with the size of the adapter.
I had never imagined an adapter that size.
The attached picture shows a comparison between 50 taper adapters (in the
man's hand) and 60 taper adapters in the box. The picture is not of the
machine here. It is just an example I found on the internet.
The link also shows dimensions in the chart at the bottom of the page.
Large, heavy, grown equipment.
http://parlecparts.com/pages/cat_taper_toolholders
thanks
Stuart
On Sun, Feb 7, 2016 at 2:15 PM, andy pugh <bodge...@gmail.com> wrote:
>
> https://en.wikipedia.org/wiki/Welin_breech_block#/media/File:Sailor_looking_into_the_breech_of_16_inch_gun_aboard_USS_Alabama_(BB-60).jpg
>
> I suspect an extremely specialised machine for the internal version.
>
> --
> atp
> If you can't fix it, you don't own it.
> http://www.ifixit.com/Manifesto
>
>
> ------------------------------------------------------------------------------
> Site24x7 APM Insight: Get Deep Visibility into Application Performance
> APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month
> Monitor end-to-end web transactions and take corrective actions now
> Troubleshoot faster and improve end-user experience. Signup Now!
> http://pubads.g.doubleclick.net/gampad/clk?id=272487151&iu=/4140
> _______________________________________________
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users
>
--
Addressee is the intended audience.
If you are not the addressee then my consent is not given for you to read
this email furthermore it is my wish you would close this without saving or
reading, and cease and desist from saving or opening my private
correspondence.
Thank you for honoring my wish.
------------------------------------------------------------------------------
Site24x7 APM Insight: Get Deep Visibility into Application Performance
APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month
Monitor end-to-end web transactions and take corrective actions now
Troubleshoot faster and improve end-user experience. Signup Now!
http://pubads.g.doubleclick.net/gampad/clk?id=272487151&iu=/4140
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
