On 8 February 2016 at 10:42, Marcus Bowman <marcus.bow...@visible.eclipse.co.uk> wrote: > For an internal right-hand thread, the problem is often that the tool feeds > into the hole from the right, and bumps into the bottom of the hole. It would > be the same for an external thread bumping into a shoulder on the left.
Ah, OK. That seems to be a solution to a completely different problem. Did you look at the pictures of the Wellin breech? The picture I originally posted didn't even seem to have the relief groove shown in the later images linked to. -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ Site24x7 APM Insight: Get Deep Visibility into Application Performance APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month Monitor end-to-end web transactions and take corrective actions now Troubleshoot faster and improve end-user experience. Signup Now! http://pubads.g.doubleclick.net/gampad/clk?id=272487151&iu=/4140 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users