Greetings all; I am not haveing any luck finding one smaller than 3/8 radius, and I need one that cuts with a 1/8" radius.
Any body know of a place I might be able to source one that small? A fingernail bit is not quite a beading bit as the ends of the cutters are at a 90 degree angle to each other, 45 degrees off axis for both upper and lower "wings". I need to roundover the ends of these trim pieces, but do it in 3d by tipping the vise 45 degrees so the meeting line of two curves is horizontal and I can then cut a curve of the same radius as if a 1/8" roundover was used. But since its two curves meeting, and LCNC can't cut a 3d curve, I don't see another way to do it without the fingernail style tool. Thanks everybody. Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ Site24x7 APM Insight: Get Deep Visibility into Application Performance APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month Monitor end-to-end web transactions and take corrective actions now Troubleshoot faster and improve end-user experience. Signup Now! http://pubads.g.doubleclick.net/gampad/clk?id=272487151&iu=/4140 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
