Hello Andy,
The base thread frequency is 100 micro seconds.The application demands to
turn-on the piston knob for 2 ms at various frequencies. That is the reason, we
are changing the frequencies from Axis GuI
BRAdit
From: andy pugh <[email protected]>
To: adit bhargava <[email protected]>
Cc: Enhanced Machine Controller (EMC) <[email protected]>
Sent: Tuesday, May 17, 2016 5:45 PM
Subject: Re: [Emc-users] How to assign values to pwmgen parameters(duty-cycle,
frequency, etc, ) from GUI ?
On 17 May 2016 at 10:24, adit bhargava <[email protected]> wrote:
> On CRO, I get correct values for frequencies of 100 Hz and 150 Hz
> But, when I try 110 Hz , 120 Hz etc. it takes wrong period
What is your base-thread frequency? It may be that this is quantising
the output frequency.
When you began this thread you made no mention of wanting to change
the PWM frequency, and it is actually rather unusual to want to do so.
_why_ are you changing the PWM frequency? Normally you only change the
duty-cycle.
--
atp
"A motorcycle is a bicycle with a pandemonium attachment and is
designed for the especial use of mechanical geniuses, daredevils and
lunatics."
— George Fitch, Atlanta Constitution Newspaper, 1916
------------------------------------------------------------------------------
Mobile security can be enabling, not merely restricting. Employees who
bring their own devices (BYOD) to work are irked by the imposition of MDM
restrictions. Mobile Device Manager Plus allows you to control only the
apps on BYO-devices by containerizing them, leaving personal data untouched!
https://ad.doubleclick.net/ddm/clk/304595813;131938128;j
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
