Andy,
I am still able to read the actual output pin hm2_5i25.0.gpio.23.out without
adding the read_gpio function.
And it is showing correct values on HALSCOPE
BRAdit
From: andy pugh <[email protected]>
To: adit bhargava <[email protected]>
Cc: Enhanced Machine Controller (EMC) <[email protected]>
Sent: Thursday, May 19, 2016 2:59 PM
Subject: Re: [Emc-users] How to assign values to pwmgen parameters(duty-cycle,
frequency, etc, ) from GUI ?
On 19 May 2016 at 08:02, adit bhargava <[email protected]> wrote:
> Yes, a real Cathode ray oscilloscope.(CRO)
I would normally trust that more than Halscope.
Note that Halscope only plots the internal values, it isn't looking at
the output pins.
I think that if you add the hm2_5i25.0.read_gpio function to the base
thread you should be able to read the actual output pin values (I
think that Mesa GPIO outputs are readable as inputs).
--
atp
"A motorcycle is a bicycle with a pandemonium attachment and is
designed for the especial use of mechanical geniuses, daredevils and
lunatics."
— George Fitch, Atlanta Constitution Newspaper, 1916
------------------------------------------------------------------------------
Mobile security can be enabling, not merely restricting. Employees who
bring their own devices (BYOD) to work are irked by the imposition of MDM
restrictions. Mobile Device Manager Plus allows you to control only the
apps on BYO-devices by containerizing them, leaving personal data untouched!
https://ad.doubleclick.net/ddm/clk/304595813;131938128;j
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
