forgot to add to my previous , they use an ir signal from the reciever box to switch the unit on so long as the probe is recieving then it remains transmitting , on loss it times out and switches off this signal can include requesting the probe battery status etc , but i have not yet decoded that
On 12 August 2016 at 09:11, Sarah Armstrong <sarahj.armstron...@gmail.com> wrote: > i had the same problem with a Renishaw ir probe , so i reverse engineered > the ir protocol > took me a few nights to sort it . > > they send a packet continuosly, and on contact touch the data stops > in the packet is id , batt condition, and a checksum > > i'd guess they may have done something similar > > > > > > On 12 August 2016 at 07:57, Dave Caroline <dave.thearchiv...@gmail.com> > wrote: > >> I have a Valeron probe that also had an infra red transmission, was >> too lazy to reverse engineer and just cleaned the contacts and wired >> direct, some probes have adjustable force, some are set to a high >> force mine was mounted on CAT50 so is a brute. >> >> http://www.collection.archivist.info/searchv13.php?searchstr=valeron >> >> Dave Caroline >> >> ------------------------------------------------------------ >> ------------------ >> What NetFlow Analyzer can do for you? Monitors network bandwidth and >> traffic >> patterns at an interface-level. Reveals which users, apps, and protocols >> are >> consuming the most bandwidth. Provides multi-vendor support for NetFlow, >> J-Flow, sFlow and other flows. Make informed decisions using capacity >> planning reports. http://sdm.link/zohodev2dev >> _______________________________________________ >> Emc-users mailing list >> Emc-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/emc-users >> > > > > -- > > The information contained in this message is confidential and is intended > for the addressee only. If you have received this message in error or there > are any problems please notify the originator immediately. The unauthorised > use, disclosure, copying or alteration of this message is strictly > forbidden. This mail and any attachments have been scanned for viruses > prior to leaving the RcTechnix network. RcTechnix will not be liable for > direct, special, indirect or consequential damages arising from alteration > of the contents of this message by a third party or as a result of any > virus being passed on. > > RcTechnix reserves the right to monitor and record e-mail messages being > sent to and from this address for the purposes of investigating or > detecting any unauthorised use of its system and ensuring effective > operation. > > (c) RcTechnix > -- The information contained in this message is confidential and is intended for the addressee only. If you have received this message in error or there are any problems please notify the originator immediately. The unauthorised use, disclosure, copying or alteration of this message is strictly forbidden. This mail and any attachments have been scanned for viruses prior to leaving the RcTechnix network. RcTechnix will not be liable for direct, special, indirect or consequential damages arising from alteration of the contents of this message by a third party or as a result of any virus being passed on. RcTechnix reserves the right to monitor and record e-mail messages being sent to and from this address for the purposes of investigating or detecting any unauthorised use of its system and ensuring effective operation. (c) RcTechnix ------------------------------------------------------------------------------ What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic patterns at an interface-level. Reveals which users, apps, and protocols are consuming the most bandwidth. Provides multi-vendor support for NetFlow, J-Flow, sFlow and other flows. Make informed decisions using capacity planning reports. http://sdm.link/zohodev2dev _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users