On 08/13/2016 12:32 PM, Valerio Bellizzomi wrote: > On Sat, 2016-08-13 at 11:12 -0500, Jon Elson wrote: >> On 08/13/2016 12:39 AM, Valerio Bellizzomi wrote: >>> is this probe good ? >>> >>> http://www.ebay.com/itm/142053837865?ssPageName=STRK:MESINDXX:IT&_trksid=p3984.m1436.l2649 >>> >>> >> This is a hobby-grade probe made in a guy's home shop, I >> believe. Still, on a hobby-grade machine, it may be better >> than you need. >> >> Jon > It is a single machine. Not sure what you intend with hobby-grade, I'm > building it and it is well designed with low cost components :-) > > I need a probe with a 8mm or 12mm shank > If your machine has .001" (.025mm) of backlash, and perhaps 10,000 steps or encoder counts/inch, then probably all of the probes will work fine.
This probe I got on eBay requires a 10 um deflection to trigger, but the repeatability is about 1-2 um! WAY better that the machine I'm going to put it on. Jon ------------------------------------------------------------------------------ What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic patterns at an interface-level. Reveals which users, apps, and protocols are consuming the most bandwidth. Provides multi-vendor support for NetFlow, J-Flow, sFlow and other flows. Make informed decisions using capacity planning reports. http://sdm.link/zohodev2dev _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
