I have a gantry router with 2x X motors. I'm using the "gantry" component.
Installing homing switches. Got the Y working right off the bat. I can see the X1 and X2 switches trigger in HAL Scope so I'm good to go. This is a wide gantry which can rack somewhat so independent homing is essential. axis.0.home-sw-in axis.0.neg-lim-sw-in hooked up fine for the X1 side. X2 axis is 3. axis.3.home-sw-in axis.3.neg-lim-sw-in do not exist to connect to, neither one. What's the homing situation like on this? Danny ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users