The pinout coming from the brushless amps is 610-1 +A CHANNEL 610-2 ANALOG GROUND 610-3 +B CHANNEL 610-4 ANALOG GROUND 610-5 ENABLE 610-6 LOGIC GROUND 610-7 FAULT 610-8 LOGIC GROUND 610-9 NOT USED 610-10 SHIELD/ANALOG GROUND
Any ideas what signal levels and types those will be? The encoders feed through the mocon pcb, so somehow these amps have to figure power and location for the bldc phase, and I don't see how that is accomplished. On Tue, Oct 11, 2016 at 3:29 PM, Erik Friesen <e...@aercon.net> wrote: > My haas is a 1996 and it shows. Attempting 0.1" engraving at 40ipm G187 > E.001 doesn't work, and I think it is a control limitation. See two paths > in this pic? aercon.net/Public/Engraving.jpg The top is attempted at 40 > IPM, the bottom at 15. To me it looks like a trajectory planning > limitation. > > The only person to attempt a haas vf conversion never finished it. > > On Tue, Oct 11, 2016 at 3:03 PM, Greg Bentzinger <skullwo...@yahoo.com> > wrote: > >> Perspective on anything read on cnccookbook.com >> >> Keep in mind that site exists to promote his software and his articles >> are written by someone who does not have long term (if any) experience with >> "Big Iron" in an industrial business environment. >> >> His opinions are biased towards the hobby/semi-pro market as that is the >> best he knows. Some info offers keen insights, while others are plain >> wrong. His software can be helpful if you are willing to make a windows PC >> with internet connection available to employees on the floor. ( Network >> connection is required so software can phone home to validate your >> subscription license.) >> >> Personally I use the other (competitor) option which has a Buy once cry >> once license option and is cross platform so it will run on my Android >> phone as well as PC. >> >> I know there are a very large group who loves the HAAS control, I >> however, after having to try and keep 8 lathes and 3 mills running and knew >> my Haas repair crew better than any other vendor, so I'm definitely not one >> of those fan boys. I like toggle switches and rotary knobs I can see status >> from 10m or yrds away. Plus tapping a membrane key to increment up or down >> a feed rate or spindle speed seems just wrong on a full sized machine. >> (Desktop mini router - I can see running just a kyb and E-Stop.) >> >> >> Not sure if Mesa's SSerial card for pendants could do that. There is >> definitely money to be made if some enterprising person or company were to >> make a plug in adapter harness for Haas and FADAL control consoles. >> >> Greg Bentzinger out yonder in Colorado >> >> ------------------------------------------------------------ >> ------------------ >> Check out the vibrant tech community on one of the world's most >> engaging tech sites, SlashDot.org! http://sdm.link/slashdot >> _______________________________________________ >> Emc-users mailing list >> Emc-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/emc-users >> > > ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, SlashDot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
