So how does the drive know how much pwm to give the motors? Or that depends on the a and b levels in that case?
On Tue, Oct 11, 2016 at 6:56 PM, Erik Friesen <e...@aercon.net> wrote: > That is the pinout between the control and the drive. The drive doesn't > have any direct encoder input. > > On Tue, Oct 11, 2016 at 6:33 PM, andy pugh <bodge...@gmail.com> wrote: > >> On 11 October 2016 at 23:24, Erik Friesen <e...@aercon.net> wrote: >> > omehow these amps have to figure power and >> > location for the bldc phase, >> >> Is that the pinout between the motors and the drive? Or is it the >> control signal to the drive? >> >> -- >> atp >> "A motorcycle is a bicycle with a pandemonium attachment and is >> designed for the especial use of mechanical geniuses, daredevils and >> lunatics." >> — George Fitch, Atlanta Constitution Newspaper, 1916 >> >> ------------------------------------------------------------ >> ------------------ >> Check out the vibrant tech community on one of the world's most >> engaging tech sites, SlashDot.org! http://sdm.link/slashdot >> _______________________________________________ >> Emc-users mailing list >> Emc-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/emc-users >> > > ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, SlashDot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
