Greetings all; I am in the process of re-arranging the peripheral layout on the inside face of the box that holds the BoB's, opto's etc on the boxes swinging door plus a couple power supplies and stepper drivers in the box proper.
As opposed to drilling umpty holes in this cover, I've sawn out some strips of HDPE, and screwed the boards to those. Its nominally 1/2" thick and I have not, but could, sand the face to be glued. So now I need to fix them to the inside face of this boxes door, and plug up the holes I have drilled already in a probably vain attempt to exclude swarf. Except for some conduit holes in the bottom, its gasketed and liquid tight. So I need a glue that will stick to this HDPE. G0-2 or Goop is one possibility, but is there something that will get an even better grip on that stuff? Thanks. Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, SlashDot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
