Connect to a Mesa ethernet controller? Dave
On 10/23/2016 1:46 PM, Gene Heskett wrote: > On Sunday 23 October 2016 12:02:58 Roland Jollivet wrote: > >> By the way, while you guys are discussing SBC's, there's also the UP >> board <http://www.up-board.org/> too, which is x86. >> >> Here's a fun video <https://www.youtube.com/watch?v=dPJiShBIPw8> on it >> too. Worth looking at... > Nice board, pricy tho at a 90 buck starting point. And no pci buss, so > nothing from pico or mesa is usable. Whats available to plug onto the 40 > pin pi header that can duplicate a mesa anything i/o functionality? > > C'mon crickets, speak up. I looked thru that blog post link to see what > might be found only to see that decently capable boards for the BBB like > the k9 have been discontinued for lack of interest. > > This is not how we move linuxcnc to the next generation hardware. > > Cheers, Gene Heskett ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, SlashDot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users