On 10/23/2016 4:28 PM, Gene Heskett wrote: > >> No biggie, on my CNC (not an SBC) I just added a wifi USB already. >> >> Mesa 7i92 are totally available from the mfg: >> >> http://store.mesanet.com/index.php?route=product/product&product_id=30 >> 2 > Not according to that web page 2 hours ago. Out of stock. But this link > say 170 on the shelf? Left hand, please call right hand. :) Either that > or the boat finally docked, I understand they've got labor problems at > some west side ports.
The DB25 FEMALE (no suffix) version is out of stock. They have plenty of "H" (two 26pin locking DIL) and "M" (DB25 male). Personally I recommend the "H". It's locking. I'm not gonna use a remade round cable, the board's right there with the controller so I'd make up an IDC ribbon cable for that anyways. Me, I built a motherboard that provided power, broke out into individual DIL 10-pins for the AM882 drives, and broke out pins for homing switches etc. > >> There are 3 versions which change the port on the end: male DB25, >> female DB25, male 26-pin DIL header. But the one in the middle is >> always a male DIL26 header. > And the 7i92M means its a male db25 on the end? Yep! > >>>> Gene Heskett ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, SlashDot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
