On Sunday 30 October 2016 19:55:34 you wrote: > Hello Gene, > > If my response takes too long, please do not get impatient, because > I'm on the other side of the pond. :) > > BTW: This is a pure linuxcnc project except the kernel. > Please download the kernel and the kernel-header with this links: > > http://deb.machinekit.io/debian/pool/main/l/linux-rt/linux-image-rpi2- >rt_4.4.4-rt9-v7+-7_armhf.deb > http://deb.machinekit.io/debian/pool/main/l/linux-rt/linux-headers-rpi >2-rt_4.4.4-rt9-v7+-7_armhf.deb > > and put it in the install dir as described in the last mails. > > Please schedule the execution of the next instructions to the end: > > Install it with > dpkg -i linux-* > > Maybe you have recognised that there are 2 partitions on the sd-card. > The 1st is the boot partition the 2nd is the rootfs. > > there is a /boot/config.txt > > in this file change or add the line: > > kernel=kernel_rt-4.4.4-rt9-v7+.img > > > Cheers Matsche
Couldn't get to sleep yet, shoulder too sore. All of the above has been done. And I managed to lockup the lathe sim once, and something that doesn't want to advertise enough to show in the htop display, is banging on the sd card at nominally 1 second intervals now. Is this a concern? And how do I shut down apache2? I don't think it should be needed and its eating 224 megs of dram. Thank you Matsche. Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ The Command Line: Reinvented for Modern Developers Did the resurgence of CLI tooling catch you by surprise? Reconnect with the command line and become more productive. Learn the new .NET and ASP.NET CLI. Get your free copy! http://sdm.link/telerik _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users