On 02/08/2017 11:34 AM, [email protected] wrote: > I don't have a physical stop on my Z axis, putting one in would be a PITA. > The drive is exceptionally strong and it would be problematic to stop the > axis that way. If you're an idiot and jog it that way prior to homing, you > can dismount the axis. > > There is a homing switch at Z+. It sounds desirable to halt + movement when > that switch is tripped, AND not homed, AND not in the actual homing sequence. > But NOT stop - movement, otherwise you'd jog it upwards, get it stuck, and > no way to jog down. > > How difficult would it be to do that? > > Danny > > Use the switch as a limit then select "limit as home". A little offset from there and you will not hit it when jogging after home.
Ed. ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, SlashDot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
