I have inductive proximity switches. Cause I'm that awesome. Danny
---- Nicklas Karlsson <nicklas.karlsso...@gmail.com> wrote: > Electrical switches will eventully fail unless you use special switches which > fail in the correct dirction, you could make it run off the screw? > > > On Wed, 8 Feb 2017 17:34:17 +0000 > <dan...@austin.rr.com> wrote: > > > I don't have a physical stop on my Z axis, putting one in would be a PITA. > > The drive is exceptionally strong and it would be problematic to stop the > > axis that way. If you're an idiot and jog it that way prior to homing, you > > can dismount the axis. > > > > There is a homing switch at Z+. It sounds desirable to halt + movement > > when that switch is tripped, AND not homed, AND not in the actual homing > > sequence. But NOT stop - movement, otherwise you'd jog it upwards, get it > > stuck, and no way to jog down. > > > > How difficult would it be to do that? > > > > Danny > > > > > > > > > > ------------------------------------------------------------------------------ > > Check out the vibrant tech community on one of the world's most > > engaging tech sites, SlashDot.org! http://sdm.link/slashdot > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > ------------------------------------------------------------------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, SlashDot.org! http://sdm.link/slashdot > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, SlashDot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users