A month ago one machine with LinuxCNC and Mesa cards: one 5i25 and one
7i77 started bringing errors(1) each time program was started. Then I
re-flashed 7i77 using ./update_7i77 script from mesanet page. It fixed
the problem.. till today. Today I got similar errors(2). And again,
reflashing 7i77 fixed the problem.
What could be the reason for that?
The system: debian wheezy 32-bit, 3.4-9-rtai-686-pae #1 SMP PREEMPT
Debian 3.4.55-4linuxcnc i686 GNU/Linux
LinuxCNC latest stable: 2.7.8
==============================================
Error log 1:
==============================================
...
Issuing EMC_TRAJ_LINEAR_MOVE -- ( +220,+120,
+0,143.598809,-5712.000000,201.155000,0.000000,0.000000,0.000000,0.000000,0.000000,0.000000,
+2,39.265845,167.159835,2407.101626, +0, -1,)
Motion id 104 took 0.075971 seconds.
Outgoing motion id is 1917.
Issuing EMC_TRAJ_LINEAR_MOVE -- ( +220,+120,
+0,143.577809,-5715.000000,201.050000,0.000000,0.000000,0.000000,0.000000,0.000000,0.000000,
+2,39.174931,166.772800,2401.528313, +0, -1,)
Motion id 105 took 0.080856 seconds.
Outgoing motion id is 1918.
Issuing EMC_TRAJ_LINEAR_MOVE -- ( +220,+120,
+0,143.557809,-5718.000000,200.981000,0.000000,0.000000,0.000000,0.000000,0.000000,0.000000,
+2,39.161224,166.714447,2400.688035, +0, -1,)
hm2/hm2_5i25.0: Encoder 0: quadrature count error
emc/task/taskintf.cc 617: Error on axis 1, command number 2494
emc/task/taskintf.cc 617: Error on axis 2, command number 2494
Motion id 106 took 0.061546 seconds.
Motion id 0 took 0.000000 seconds.
Outgoing motion id is 2919.
joint 1 following error
joint 2 following error
hm2/hm2_5i25.0: Smart serial card hm2_5i25.0.7i77.0.0 error = (31)
LBPCOM Fault
hm2/hm2_5i25.0: Smart serial card hm2_5i25.0.7i77.0.0 error = (30)
Illegal Remote Mode
hm2/hm2_5i25.0: Smart serial card hm2_5i25.0.7i77.0.0 error = (29) Under
Voltage
hm2/hm2_5i25.0: Smart serial card hm2_5i25.0.7i77.0.0 error = (28) Over
Voltage
hm2/hm2_5i25.0: Smart serial card hm2_5i25.0.7i77.0.0 error = (27) Over
Current
hm2/hm2_5i25.0: Smart serial card hm2_5i25.0.7i77.0.0 error = (26) Over
Temperature
Issuing EMC_TASK_PLAN_SYNCH -- ( +516,+12, +0,)
hm2/hm2_5i25.0: Smart serial card hm2_5i25.0.7i77.0.0 error = (25) No Enable
hm2/hm2_5i25.0: Smart serial card hm2_5i25.0.7i77.0.0 error = (24)
Watchdog Fault
hm2/hm2_5i25.0: Smart serial card hm2_5i25.0.7i77.0.0 error = (8) Remote
fault
hm2/hm2_5i25.0: Smart serial card hm2_5i25.0.7i77.0.1 error = (31)
LBPCOM Fault
hm2/hm2_5i25.0: Smart serial card hm2_5i25.0.7i77.0.1 error = (30)
Illegal Remote Mode
hm2/hm2_5i25.0: Smart serial card hm2_5i25.0.7i77.0.1 error = (29) Under
Voltage
hm2/hm2_5i25.0: Smart serial card hm2_5i25.0.7i77.0.1 error = (28) Over
Voltage
hm2/hm2_5i25.0: Smart serial card hm2_5i25.0.7i77.0.1 error = (27) Over
Current
hm2/hm2_5i25.0: Smart serial card hm2_5i25.0.7i77.0.1 error = (26) Over
Temperature
hm2/hm2_5i25.0: Smart serial card hm2_5i25.0.7i77.0.1 error = (25) No Enable
hm2/hm2_5i25.0: Smart serial card hm2_5i25.0.7i77.0.1 error = (24)
Watchdog Fault
hm2/hm2_5i25.0: Smart serial card hm2_5i25.0.7i77.0.1 error = (8) Remote
fault
hm2/hm2_5i25.0: Encoder 0: quadrature count error
==============================================
Error log 2 - png file attached
==============================================
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
