On Monday 24 April 2017 07:52:55 Marius Alksnys wrote: > A month ago one machine with LinuxCNC and Mesa cards: one 5i25 and one > 7i77 started bringing errors(1) each time program was started. Then I > re-flashed 7i77 using ./update_7i77 script from mesanet page. It fixed > the problem.. till today. Today I got similar errors(2). And again, > reflashing 7i77 fixed the problem. > > What could be the reason for that? > > The system: debian wheezy 32-bit, 3.4-9-rtai-686-pae #1 SMP PREEMPT > Debian 3.4.55-4linuxcnc i686 GNU/Linux > LinuxCNC latest stable: 2.7.8 > > > ============================================== > Error log 1: > ============================================== > ... > Issuing EMC_TRAJ_LINEAR_MOVE -- ( +220,+120, > +0,143.598809,-5712.000000,201.155000,0.000000,0.000000,0.000000,0.000 >000,0.000000,0.000000, +2,39.265845,167.159835,2407.101626, +0, > -1,) > Motion id 104 took 0.075971 seconds. > Outgoing motion id is 1917. > Issuing EMC_TRAJ_LINEAR_MOVE -- ( +220,+120, > +0,143.577809,-5715.000000,201.050000,0.000000,0.000000,0.000000,0.000 >000,0.000000,0.000000, +2,39.174931,166.772800,2401.528313, +0, > -1,) > Motion id 105 took 0.080856 seconds. > Outgoing motion id is 1918. > Issuing EMC_TRAJ_LINEAR_MOVE -- ( +220,+120, > +0,143.557809,-5718.000000,200.981000,0.000000,0.000000,0.000000,0.000 >000,0.000000,0.000000, +2,39.161224,166.714447,2400.688035, +0, > -1,) > hm2/hm2_5i25.0: Encoder 0: quadrature count error > emc/task/taskintf.cc 617: Error on axis 1, command number 2494 > emc/task/taskintf.cc 617: Error on axis 2, command number 2494 > Motion id 106 took 0.061546 seconds. > Motion id 0 took 0.000000 seconds. > Outgoing motion id is 2919. > joint 1 following error > joint 2 following error > hm2/hm2_5i25.0: Smart serial card hm2_5i25.0.7i77.0.0 error = (31) > LBPCOM Fault > > hm2/hm2_5i25.0: Smart serial card hm2_5i25.0.7i77.0.0 error = (30) > Illegal Remote Mode > > hm2/hm2_5i25.0: Smart serial card hm2_5i25.0.7i77.0.0 error = (29) > Under Voltage > > hm2/hm2_5i25.0: Smart serial card hm2_5i25.0.7i77.0.0 error = (28) > Over Voltage > > hm2/hm2_5i25.0: Smart serial card hm2_5i25.0.7i77.0.0 error = (27) > Over Current > > hm2/hm2_5i25.0: Smart serial card hm2_5i25.0.7i77.0.0 error = (26) > Over Temperature > > Issuing EMC_TASK_PLAN_SYNCH -- ( +516,+12, +0,) > hm2/hm2_5i25.0: Smart serial card hm2_5i25.0.7i77.0.0 error = (25) No > Enable > > hm2/hm2_5i25.0: Smart serial card hm2_5i25.0.7i77.0.0 error = (24) > Watchdog Fault > > hm2/hm2_5i25.0: Smart serial card hm2_5i25.0.7i77.0.0 error = (8) > Remote fault > > hm2/hm2_5i25.0: Smart serial card hm2_5i25.0.7i77.0.1 error = (31) > LBPCOM Fault > > hm2/hm2_5i25.0: Smart serial card hm2_5i25.0.7i77.0.1 error = (30) > Illegal Remote Mode > > hm2/hm2_5i25.0: Smart serial card hm2_5i25.0.7i77.0.1 error = (29) > Under Voltage > > hm2/hm2_5i25.0: Smart serial card hm2_5i25.0.7i77.0.1 error = (28) > Over Voltage > > hm2/hm2_5i25.0: Smart serial card hm2_5i25.0.7i77.0.1 error = (27) > Over Current > > hm2/hm2_5i25.0: Smart serial card hm2_5i25.0.7i77.0.1 error = (26) > Over Temperature > > hm2/hm2_5i25.0: Smart serial card hm2_5i25.0.7i77.0.1 error = (25) No > Enable > > hm2/hm2_5i25.0: Smart serial card hm2_5i25.0.7i77.0.1 error = (24) > Watchdog Fault > > hm2/hm2_5i25.0: Smart serial card hm2_5i25.0.7i77.0.1 error = (8) > Remote fault > > hm2/hm2_5i25.0: Encoder 0: quadrature count error > > > > > ============================================== > Error log 2 - png file attached > ==============================================
Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
