My Error Andy pugh. I bad wrote my concept, I try to correct it:
If I wanted to redistribute my work on Lcnc I must linux mint or debian or other linux distro that support rt patch .... because ubuntu policy licensing is a bit hard to use (You must recompile the SO leaving all ubuntu brand refer and program that use ubuntu brand in header). Well, in the end I think I'll use a qt interface on windows if things get complicated further with the gnu licenses.I also have a motherboard naked inside a box with its power supply for desk tests .... but here all my pcs are ubuntu ... i never used to mac ... the fact that here from We cost a bang has a lot to do with this choice ..... if i could also i would buy cars and electronics in america ... i would save at least 50%. Talking apart I was referring to the talk of licenses and the fact that in any case I have to deal with a lot more familiarity with debian ... for example I could start right from networkmanager and egalax driver. Many thanks Giorgio ________________________________ Da: andy pugh <bodge...@gmail.com> Inviato: venerdì 5 maggio 2017 13.44 A: Enhanced Machine Controller (EMC) Oggetto: Re: [Emc-users] touch screen calibration assistance please On 5 May 2017 at 12:30, giorgio foga <giorgiof...@hotmail.it> wrote: > Not worry, as I can understand today if I wanted to redistribute my work on > Lcnc I have to use either linux or debian linux ... so I could run with > egalax and debian ... but if i use debian I do not get very excited ... too > many bash commands do not answer This is me dry Not necessarily. I do all my LinuxCNC work sat in front of an iMac. I have a bare motherboard on the bookshelf to check out hardware/rtai stuff, but I use a variety of remote-mounted file systems, VMs and X-forwarding to the Mac screen for the coding. -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of mechanical geniuses, daredevils and lunatics." — George Fitch, Atlanta Constitution Newspaper, 1916 ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users Emc-users Info Page - SourceForge<https://lists.sourceforge.net/lists/listinfo/emc-users> lists.sourceforge.net This list is for users of the Enhanced Machine Controller (EMC). Topics include how to obtain, install, configure, and use EMC, as well as other general EMC related ... ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
