Hi Todd,
I did that but I can't build because it needs Python >=2.7 and the
repositories only contain 2.6. I tried a very basic test config with
with the version that is shipped with 2.7.9 and it appeared to run
smoothly, at least once I figured out I needed to pet the watchdog. I'm
not going to admit how long it took me to figure that one out :-[
I can't run my lathe properly because it depends on a bunch of custom
modules which I can't sort out until I can build LinuxCNC.
Les
On 28/06/2017 12:31, Todd Zuercher wrote:
Yes, the latest v2.7.9 will run on the older Ubuntu 10.04 ISOs.
They can be down loaded here:
http://linuxcnc.org/iso/
Forgot to mention, You will need to change the old Ubuntu repo lines.
deb http://linuxcnc.org lucid base 2.7-rtai
deb http://old-releases.ubuntu.com/ubuntu/ lucid main restricted universe
multiverse
deb http://old-releases.ubuntu.com/ubuntu/ lucid-updates main restricted
universe multiverse
deb http://old-releases.ubuntu.com/ubuntu/ lucid-security main restricted
universe multiverse
deb http://old-releases.ubuntu.com/ubuntu/ lucid-backports main restricted
universe multiverse
----- Original Message -----
From: "Les Newell" <les.new...@fastmail.co.uk>
To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net>
Sent: Wednesday, June 28, 2017 4:50:38 AM
Subject: Re: [Emc-users] Rough motion with servos
Is there any way to install an older RTAI version?
Les
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
