On Friday 29 September 2017 17:33:36 you wrote: The sim runs, but there so much stuff missing from this build, it just won't start using the same config the pi is using, I've copied all that stuff across.
Here is what I get, and what do I do to solve it? This rock64 claims its gpio scheme (I I assume pin #'s vs functions) matches the pi's. Here is what I get from an attempted execution of the axis-7i90.ini the pi runs well: rock64@rock64:~/linuxcnc/configs/sheldon-lathe$ linuxcnc LINUXCNC - 2.8.0~pre1 Machine configuration directory is '/home/rock64/linuxcnc/configs/sheldon-lathe' Machine configuration file is '7i90-axis.ini' Starting LinuxCNC... Found file(REL): ./hm2-7i90-stepper.hal Note: Using POSIX non-realtime hm2: loading Mesa HostMot2 driver version 0.15 hm2_rpspi: Unsupported Platform, only Raspberry1/2/3 supported. hm2_rpspi: rtapi_app_main: Operation not permitted (-1) ./hm2-7i90-stepper.hal:34: waitpid failed /home/rock64/linuxcnc-dev/bin/rtapi_app hm2_rpspi ./hm2-7i90-stepper.hal:34: /home/rock64/linuxcnc-dev/bin/rtapi_app exited without becoming ready ./hm2-7i90-stepper.hal:34: insmod for hm2_rpspi failed, returned -1 Shutting down and cleaning up LinuxCNC... Also, hostmot2 is not available in the repo's used. Might have to build that too? looking through hm2_rpspi.c, it looks to be made specific to the pi's gpio SoC chip. I am wondering if the checks for pi only silicon can be defeated long enough to do some debugging since the rockchip claims compatibility with the pi stuff. Or is this something to ask Bertho Stultans about? I can supply the bootup dmesg to anyone interested if that would help ID the gpio. Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
