Oops. EMC-Inch.spm. No '2' in the file name. > -----Original Message----- > From: John Dammeyer [mailto:[email protected]] > Sent: October-29-17 2:18 PM > To: 'Enhanced Machine Controller (EMC)' > Subject: Re: [Emc-users] G-Code > > Of course. Silly me. EMC2-Inch.spm. > I did run the general.spm output with the G90.1 entered from the MDI line > first. Then the file actually ran without issues. > Now I'm running the EMC2-Inch.spm post processor file and it loaded and is > running without incident. > This file has a G90 and a the G91.1 is still set. I guess G90 over-rules > G91.1? > > In either case. That's working. > Thanks > John > > > > -----Original Message----- > > From: andy pugh [mailto:[email protected]] > > Sent: October-29-17 1:21 PM > > To: Enhanced Machine Controller (EMC) > > Subject: Re: [Emc-users] G-Code > > > > On 29 October 2017 at 17:56, John Dammeyer <[email protected]> > > wrote: > > > > > But no LinuxCNC.spm. > > > > Is there an "emc.spm"? LinuxCNC used to be called EMC2 and some > > post-processors haven't caught on to the name-change. > > > > -- > > atp > > "A motorcycle is a bicycle with a pandemonium attachment and is > > designed for the especial use of mechanical geniuses, daredevils and > > lunatics." > > ? George Fitch, Atlanta Constitution Newspaper, 1916 > > > > ------------------------------------------------------------------------------ > > Check out the vibrant tech community on one of the world's most > > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > > _______________________________________________ > > Emc-users mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > ------------------------------------------------------------------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users
------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
