hi, I rearranged a spindle encoder, with some homemade version due to some mounting difficulties, and had it running. While working with this, I did an update to 2.6.13 and have not been able to have it running after that. I cannot figure out why. Then I have upgraded to 2.7.11 with the same result.
When starting the cut, it seems to be waiting forever for the index to trigger. I have checked the pulses, which should work. Also tried to replace them with a computer generated pulsetrain, which would make more accuratly timed pulses. Include some files of a new setup made by stepconf. Any idea what may be wrong ? Suggestions on how to troubleshoot ?
test27.ngc
Description: Binary data
test27.ini
Description: Binary data
test27.hal
Description: application/vnd.hal
Module Size Used by pwmgen 12416 0 near 12413 0 lowpass 12413 0 scale 12413 0 abs 12413 0 encoder 12443 0 stepgen 16544 0 hal_parport 16691 0 motmod 116447 0 trivkins 12495 1 motmod hal_lib 39487 10 abs,near,trivkins,scale,encoder,lowpass,hal_parport,stepgen,motmod,pwmgen rtapi 34958 10 abs,near,scale,encoder,lowpass,hal_parport,stepgen,hal_lib,motmod,pwmgen rtai_math 56034 0 rtai_sched 191741 1 rtapi rtai_hal 231371 2 rtapi,rtai_sched ppdev 12591 0 lp 12767 0 rfcomm 36117 0 bnep 17186 2 bluetooth 166348 10 bnep,rfcomm uinput 17057 1 nfsd 202675 2 nfs 277039 0 nfs_acl 12464 2 nfs,nfsd auth_rpcgss 32226 2 nfs,nfsd fscache 35490 1 nfs lockd 56898 2 nfs,nfsd sunrpc 151263 6 nfs,nfsd,auth_rpcgss,lockd,nfs_acl loop 21832 0 snd_hda_codec_analog 69049 1 snd_hda_intel 25789 2 tpm_infineon 12785 0 snd_hda_codec 79439 2 snd_hda_intel,snd_hda_codec_analog snd_hwdep 12911 1 snd_hda_codec snd_pcm 69181 2 snd_hda_codec,snd_hda_intel snd_page_alloc 12842 2 snd_pcm,snd_hda_intel snd_seq 43338 0 snd_seq_device 12981 1 snd_seq snd_timer 22188 2 snd_pcm,snd_seq snd 46731 12 snd_hwdep,snd_timer,snd_pcm,snd_seq,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_hda_codec_analog hp_wmi 13059 0 sparse_keymap 12681 1 hp_wmi i915 360470 3 psmouse 67176 0 rfkill 18403 3 hp_wmi,bluetooth drm_kms_helper 26601 1 i915 drm 169993 4 i915,drm_kms_helper i2c_algo_bit 12648 1 i915 parport_pc 21896 2 tpm_tis 17138 0 iTCO_wdt 16918 0 iTCO_vendor_support 12586 1 iTCO_wdt tpm 17590 2 tpm_tis,tpm_infineon video 17461 1 i915 soundcore 12891 1 snd serio_raw 12734 0 evdev 17099 13 i2c_core 23097 4 drm,i915,drm_kms_helper,i2c_algo_bit coretemp 12771 0 parport 35208 4 lp,ppdev,hal_parport,parport_pc wmi 17148 1 hp_wmi thermal_sys 17699 1 video tpm_bios 12778 1 tpm button 12818 1 i915 ext4 270189 1 crc16 12328 2 ext4,bluetooth jbd2 54294 1 ext4 mbcache 12899 1 ext4 usbhid 39608 0 hid 72252 1 usbhid sg 25482 0 sr_mod 21529 0 cdrom 38893 1 sr_mod sd_mod 43403 3 crc_t10dif 12333 1 sd_mod floppy 51935 0 uhci_hcd 26254 0 ata_generic 12440 0 ehci_hcd 43561 0 ahci 24918 2 microcode 17386 0 libahci 22312 1 ahci e1000e 133515 0 libata 152992 3 ahci,libahci,ata_generic usbcore 124257 4 uhci_hcd,ehci_hcd,usbhid usb_common 12339 1 usbcore scsi_mod 125436 4 sg,libata,sd_mod,sr_mod
custom_postgui.hal
Description: application/vnd.hal
------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
