I'm interested if it's too big for Gene. My mill is like a G3616 from Grizzly and I'm just working on the pattern for the X axis motor and bearing mounts. John Dammeyer
> -----Original Message----- > From: Jeff Johnson [mailto:[email protected]] > Sent: November-16-17 11:54 AM > To: [email protected] > Subject: [Emc-users] Gene's Rotary > > I have a small two axis rotary here that I will donate to Gene. You can make > a 5 axis mill! It may be too big for you but I will dig it out and snap some > pics next to a tape measure. > > If Gene does not want it I will let it go to the first offer of $100.00 to > anyone on the list. > > Let me know if anyone has any interest. > > I sold the mill I was going to use it on so it just sits on a pallet > collecting dust. > > Jeff Johnson > [email protected] > Superior Roll & Turning > 734-279-1831 > > I am half-heartedly looking for a rotary table, smallish but without any > huge backlash, for use on the g0704. A 4" chuck would hold most of what I > might do. I have one now, but backlash is relatively huge and variable > because the bull gear is eccentric, and it hasn't a working well enough as a > clamp facility to hold against cutting forces. Best I've been able to do is > draw the bolt down, and injecting air at 100 psi or so into the seat to > unlock it enough that a 225 oz motor can turn it. That of course drives the > grease out of the central bearing too. Gotta be a better way. > > Cheers, Gene Heskett > -- > "There are four boxes to be used in defense of liberty: > soap, ballot, jury, and ammo. Please use in that order." > -Ed Howdershelt (Author) > Genes Web page <http://geneslinuxbox.net:6309/gene> > > ********* > > > ---------------------------------------------------------------------------- -- > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
