On 12/01/2017 08:19 AM, dave engvall wrote:
Hi all,
I'm attempting to build sim on a Mint 18.2 machine. A friend of mine
has in running 18.2 and 18.3
under VM so this should not be a giant leap.
Has anyone tried sim under Mint? Any ideas or suggestions?
This is a rip installation on a machine with plenty of resources.
Somehow there is a conflict on this machine that does not exist on
others.
This is driving me over the edge as if I wasn't already there. ;-)
I will gladly provide more information I just need to know what might
help.
Clearly I'm missing something.
TIA
Dave
dave@davedesk ~/linuxcnc $ scripts/linuxcnc
LINUXCNC - 2.8.0~pre1
Error in startup script: couldn't load file
"/home/dave/linuxcnc/tcl/bin/../linuxcnc.so":
/home/dave/linuxcnc/tcl/bin/../linuxcnc.so: cannot open shared object
file: No such file or directory
while executing
"load [file join [file dirname [info script]] linuxcnc[info
sharedlibextension]]"
(file "/home/dave/linuxcnc/tcl/bin/../linuxcnc.tcl" line 61)
invoked from within
"source [file join [file dirname [info script]] .. linuxcnc.tcl]"
(file "/home/dave/linuxcnc/tcl/bin/pickconfig.tcl" line 29)
I didn't catch this but a very helpful friend did.
The missing something turns out to be flavor. 18.2 Mate will build and
run linuxcnc-sim.
Cinnamon and XFCE give the will not and give the above error.
I hope this is useful to someone.
Dave
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
