So what exactly do they do when the bus voltage rises during decel ??
Or is there no decel control at all?
I've never seen a drive without braking circuitry and DC bus voltage
control.
Dave
On 1/2/2018 11:07 AM, John Figie wrote:
That would be a poor design if no braking resistor causes it to blow up.
Once the bus gets pushed up to its max limit it should let the motor coast
to a stop.
John Figie
On Jan 2, 2018 9:58 AM, "Eric Keller" <[email protected]> wrote:
On Tue, Jan 2, 2018 at 10:46 AM, Les Newell <[email protected]>
wrote:
I would avoid the Huanyang drives as they have a reputation for blowing
up.
Les
My thought is they probably blow up because they have no braking circuitry
installed, even internal to the drive. Unless it gets added. The gohz seems
to be the same hardware/firmware just from a short scan of the manual.
Wonder if it has a braking circuit.
------------------------------------------------------------
------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
