It looks like the bearings were submerged in oil on the the machine as
both are sitting in a sump with oil drain each. The top bearing has
large feed groove for the oil. That will only work if submerged.
------ Original Message ------
From: "jeremy youngs" <jcyoung...@gmail.com>
To: "Enhanced Machine Controller (EMC)"
<emc-users@lists.sourceforge.net>
Sent: 2018-04-02 17:13:17
Subject: Re: [Emc-users] What RPM
600 continuously and 1000 for short periods with light load. You should
also get wick style oilers for it
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
